Rep Power: 299

Nice, reminds me that I need to paint my FMIC black also haha.

 
Rep Power: 264

spinal tap, **** is funny. nice work again foos.

 
Rep Power: 0

"OK, all those days I didn't work on the car don't count as install days which is why we're at 11. And also because 11 is one louder than 10. You see, other bands, their ***** only go up to '10', but ours, they go up to '11'. That's one louder."

didnt that come from Guitar Hero?

 
Rep Power: 0

^^^^ What???!?!?

Next thing you'll be telling be that "The snozberries taste like snozberries." was first heard in Super Troopers. Oh wait. You're 17 - LOL!!! Too funny!

Spinal Tap - Break Like the Wind!!!!

And click THIS to go listen to the audio clip I uploaded of it.

 
Rep Power: 335

repairs are happening just gathering of parts right now. gonna pull the lip off start sanding it down. main thing is i need frame work. im convinced that the frame is notched because of the sunroof. before the incident the sunroof was in there tight and after it rattles around and has play. but anywho it does not make me want to go turbo and the k swap is still happening :-)

you'll see something turbo out of me eventually and itll be in the form of a nissan and itll start with an sr20 and end in a det lol


oh god i love spinal tap!

the review for shark sandwhich was just 2 words.....**** sandwhich

 
Rep Power: 0

Nice! Did you end up buying that little 'Z' then? Be careful, one money pit on wheels is bad enough, let alone 2 of them!

That's a sumbitch about your frame though. If the sunroof had play, it also may leak. Hopefully it just jarred the rails loose?

Stopped by my welder today, he still hasn't started on it. Once he does, it will be a quick 2-hour job. I won't start getting pushy unless its the last bit I'm waiting on.

Off to the garage to shred my fingers on wiring!

 
Rep Power: 304

its been 2 weeks!!!! GEEZE!!! tell him to get off his lazy butt!

 
Rep Power: 0

Buh bye.

 
Rep Power: 0

Buh bye.

 
Rep Power: 0

Buh bye.

 
Rep Power: 263

Speedfoos I have been watching every step of the turbo install and must say that I am very impressed. I think you should make a video of the fire up.
We all know your not camera shy

 
Rep Power: 0

That is the part I'm most afraid of!

I've been busting my *** for 2 weeks now, and have probably logged over 40 hours on the install and all the other **** I've been doing while putting the turbo on. If this ****er doesn't turn over, leaks oil, sprays fuel all over the place, or does anything else other than purr like a kitten on Chris' basemap, I'm going out into town and killing the first person I see!

I'd like to think I've done everything right. That it's all hooked up correctly, and I don't have any manufacturer defects in the parts I have. I keep telling myself, "Remember to fill it back up with oil, coolant, and PS fluid before you try to start it, Clint!" This better be fanfreakingtastic when it's done!

 
Rep Power: 360

awesome man...very nice watching u do this...its turning out very nice.

 
Rep Power: 263

Yea I know the feeling turning over a engine that has been pulled apart and put back together is a nerve racking experiance, at least thats how I felt after rebuilding my jeep.
But I'm sure it will start just fine and I'm sure you can handle what kinks might pop up.
I'm keeping my fingers crossed for you.

 
Rep Power: 331

looks good foos..i had to decrappify my alternator today too! not because i wanted to, but because it took a **** on me this morning. driving it to my shop with less than 11V charging voltage.. put a nice $230 dent in my tuning money because honda was the only place that had that POS in stock.. looks pretty tho

 
Rep Power: 0

Ouch man, that sucks. I would have just bought the HO jobby off Ebay for that price, but then you'd have had to deal with the downtime. Is you welder back in town yet?

The one thing I'm really worried about is the fueling. I bought the injectors used and didn't get them cleaned or flow tested. I mean they look fine, but I won't know for sure until I fire the bitch up. Some time this week hopefully!

 
Rep Power: 0

hey man, good luck, i hope u dont have any problems with startup, i hope it runs smooth and purrs like a kitten/roars to life, keeping my fingers crossed for u, u can do it... u can do it alll night long

 
Rep Power: 331

he just got back in today, but im still waiting on a set of 20 t-bolt clamps to come in, and ive decided i want to get my valve cover and charge pipes powder coated, luckily i was able to borrow a spare valve cover so i wont have down time. now i just gotta pick a color, i think i may have to copy off of you and go with blue since just about everything aluminum under my hood is blue... AEM/hondata cam gear, vtec condom, GE vac mani, GE oil cap , and tial wastegate.

 
Rep Power: 299

I was nervous as hell when I first fired up my built engine... It was REALLY relieving to have it run like a stock Honda. The only real difference is when the starter turns it over it sounds different.

 
Rep Power: 0

Blue is better. Its hotter than red.

Yeah I need to more two t-bolt clamps as well because I didn't have enough of the right size ones. Its just for the air filter pipe, one on the pipe side next to the snail and the other on the filter itself. I'll be getting a new filter soon anyway, so I'm not stressing it though.

 
Rep Power: 304

i vote for a vid on the initial turnover experience... whether it is good or bad... i want the initial "WHOOO HOOO!!!!" or the "OMFG!!!!"

 
Rep Power: 0

Oh it will be video'd, that's for sure!

 
Rep Power: 267

hey speedfoos what brush die you use to clean them up?

 
Rep Power: 0

Just your standard 3" (75mm) cup brush. It flexes enough to get into the nooks and crannies.

 
Rep Power: 0

Additional MAP sensor is vac-lined in. Just had to pop back in for my camera and the wideband wiring instructions.

 
Rep Power: 328

Dedication my friend, You Have It.

 
Rep Power: 0

Buh bye.

 
Rep Power: 264

i haven't been this excited since....well ever and i hope everything is ok on the first fire up.

 
Rep Power: 259

awesome..finally things coming together smoothly..if only that damn exhaust guy would hurry the hell up. i hope its worth it too..he doesnt do a crap job on it and mess everything up..

good job on the finishing touches foos except for the glove box..lol nice hole.. subscribed for initial fire up..

and um..im getting the first woohoo LT...u can have the OMFG!!

 
Rep Power: 0

Yeah that glove box looks like ****! Oh well, I've some aluminum sheet that will do the trick for it tomorrow.

Naw, Paul my welder is an artist with a TIG torch. All these delays have really forced me to take my time and do everything right though!