Rep Power: 0

nice wrap, i think it will do for not sucking plastic bags on the road when your exhaust is too hot lol

 
Rep Power: 0

Buh bye.

 
Rep Power: 0

yeah i know it should be closer to the TB, but this is how the kid have his piping done. was a universal piping kit.. dont have much option with this setup to putting a bov up there unless i mount it side ways, as the hood gets in the way. yeah thats the old skool hks ssqv. either way, im getting compressor surge from the way it sounds (flutters bad).

lmao, yeah thats some redneck welding for yah... ima file it down and then wrap it. should be fine. yeah its straight down and dumps to atmosphere.

as far as the oil fitting, your basically sayin just take out the 90o turn fitting.. hmm have to see how that will end up.... i still need to call dezod and see if there kit comes with a restrictor, then ill know if ones in there or not.

ill get that measurment for you tommorow, so you can weld that tial flange on it for me. and by the way, there is no clamp on my bov... guess the redneck caulked it..... bah, no worries

i worked on my headlights today. i resurfaced them from water damage, ill post pics in sec.

 
Rep Power: 0

did you look at the other pics and see what i was talking about how all the pipes were blue except the last one?

 
Rep Power: 0

http://s3.photobucket.com/albums/y95...EN/headlights/

you can tell the before and after shots. i started with the left and then the right. they were bad water damaged, so i did a complete resurfacing

can you say bling factor?

 
Rep Power: 239

ok this is random and hasn't been talked about since the last page..but 1. What are some really good games like yall are talking about and 2.) everyone needs to give 10 points to everyone for christmas..

 
Rep Power: 0

Nice stuff man. I wouldn't worry about the mani coloration at all, I don't think it's related to your WOT boost issues. I simply think either the RSX injectors can't flow enough or are ****ed in some other way.

Good job on the headlights man. What did you use to polish them up?

Good games....IDK. The last game I really enjoyed was Quake 4. I've got Clive Barker's Jericho en route, and will try the new NFS Pro Street. But Halo 3, Gears of War, any of the Lego Star Wars are a complete blast.

 
Rep Power: 328

Boosted01vic #3 Jujubee thanks to me.

I thought that rep did not matter and it was just a bunch of N00b crap. Hmmmm, whatever.

 
Rep Power: 281

haha..with StrongBad pumpkin as his avatar....that alone is worthy of rep

 
Rep Power: 281

awww...can't rep you bro...

 
Rep Power: 328

That is ok, you are the first to comment on the Strongbad pumpkin head.
LOL.

 
Rep Power: 281

yeah, i used to checkout homestar and friends all the time...not so much anymore though...

 
Rep Power: 0

LOL - they banned Nick again. Just when we were all getting along...

So the car and this country are completely pissing me off. This country pisses me off because I can't go to Home Depot or Advance Auto Parts to buy the **** to replace what I break. I have to find the little, hole-in-the-wall places that carries the parts I need and then pay 3 times as much as I would if I was in the states. You have no idea how hard it is to find even hex-head bolts!!

Since I've been working on the exhaust in my tiny (British), unheated garage for the past two days, I've broken the following tools:

My die grinder (sniff...)
My step drill bit

The following parts:

Secondary O2 sensor
Oil return fitting (on the hose, not the pan)
a wastegate bolt

Here are the pics I have of my broken ****:






I ruined my drill bit putting O2 holes in my downpipe. See. This is right after I shot it with some WD40 to lubricate the hole and make cool special effects.




My mad welding skillz





The exhaust itself is done. I still have to route the dumptube for the wastegate. I've decided not to plumb it back into the exhaust this time and dump into the atmo because I'm pissed at Mother Earth for making it so cold and shitty lately. Global warming my ***. Here's the complete downpipe assembly:






I had to pull the wrap off the downpipe because I couldn't get that damn bottom bolt back in. I may wrap it once it's bolted up after I swap the head next week. I don't know yet.

Now I just have to figure out how I'm going to run my oil return line since this DP is much larger. If I lived in a real country I could just go get some hard line and make it fit. But I've already covered this.

Blech what a pain in the ***. Sorry Richard, I know you're from here and all, but it's a nightmare to get anything done.

 
Rep Power: 0

really thats some impressive work Clint, and as i always say, if ur not breaking stuff, ur not getting any work done. also, i always buy tools with lifetime warranties, ie cornwell, snap-on etc... welds look pretty good, u think ur gonna get her done today?

 
Rep Power: 0

LOL - I always miss your IMs and then you've signed off!

No, I've quit working on it for the day. I spent 6 hours on it last night and another 6 hours on it today and I'm tired of being outside in 40 degree weather. I have a space heater, but don't like to run it when I'm welding so I just leave it off.

Yeah, for hand-tools, lifetime warranty is the only way to go. My little B&D grinder had a good run, I just hate having stuff break when I still need it to complete a job. At least the only welding I have left to do is the dump tube fab. It just makes me mad because I was going to use the grinder to see if I couldn't salvage that O2 sensor after cutting it out of the old cat. God I don't want to pay british prices for a new one...

 
Rep Power: 0

if u need anything of really high quality let me know, i have 3 tool trucks that come to my work, i could pick it up for ya and ship it if need be...

 
Rep Power: 328

I agree with Adam, if you need any parts, tools, just hit him or I up and we will ship them out.

Well it is my turn to go break something. Off to put on the stupid header. lol

 
Rep Power: 0

Woohoo!!!! Go Matt go!

 
Rep Power: 0

what header u get

 
Rep Power: 259

I found a new sig thanks to the foos..

 
Rep Power: 328

I have Clints old DC header. I also have his old Strut Brace.

I will post pics.

 
Rep Power: 281

ha ha...that's good...

this one's better...VG Cats webcomic

 
Rep Power: 328

Ok, I am done. lol
That took all of about 20 min.

Looks good too.
I did strip out one bolt though. But I have no exhaust leak so I will fix it later. lol.

 
Rep Power: 0

One of the top two bolts or the bottom studs?

 
Rep Power: 0

did u ruin the bolt that comes out, or one going in?

 
Rep Power: 328

The second from the Drivers side bottom stud.
I think maybe the center bottom also.

I guess I am just too strong from all that cake eating. lol

 
Rep Power: 0

well, i guess if its not leaking, u can just deal with it later

 
Rep Power: 328

That is exactly the slacker theory I was going to use.
Don't fix it till you are on the side of the road or broke down at work in the parking lot. Aint that right Foos? lol

 
Rep Power: 0

*******.

 
Rep Power: 291