MONTREAL area: General Discussion
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 
Getting information about the shops in Ontario rather than locally - if you catch that drift 
But I very much doubt I'm going to swap it.. especially not in the near future, as well most of my cash is locked away anyways.
Thanks for the offer .. only real help would probably be to ensure I don't scrape it as I pull it off I guess. Though I've already messed up the clips enough that I should go buy new ones... 
They still work so we'll see.. but yeah.. sometime next week when the weather will be nice. So I have time to play with the oven and opening up my headlights 
Well at least I know most of the steps, just never done it so apprehensive about it.
But I very much doubt I'm going to swap it.. especially not in the near future, as well most of my cash is locked away anyways.Thanks for the offer .. only real help would probably be to ensure I don't scrape it as I pull it off I guess.
Though I've already messed up the clips enough that I should go buy new ones... They still work so we'll see.. but yeah.. sometime next week when the weather will be nice. So I have time to play with the oven and opening up my headlights Well at least I know most of the steps, just never done it so apprehensive about it. 
Registered!!
iTrader: (1)
Joined: Jul 2002
Posts: 2,699
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 0 Bleh i've done it's not problem it's seems much harder than it is. Takes about 20 mins don't have to take it off just pull it abit. We'll have an install meet, mark needs some stuff done too lol. I might be able to hook you up with a heat gun might easier than the oven. I'll see if I can get my hands on it.
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by XxJDMCivicxX
Bleh i've done it's not problem it's seems much harder than it is. Takes about 20 mins don't have to take it off just pull it abit. We'll have an install meet, mark needs some stuff done too lol. I might be able to hook you up with a heat gun might easier than the oven. I'll see if I can get my hands on it.
I know for coupes the headlights are supposedly more do-able with a heatgun (and/or blow dryer at worst), but with sedans and TYCs the seal was tougher. I dunno really, its what I've read somewhere. But ya, if you want to set up an install meet then do it - just well I've waited long so make it snap snap 
Oh, and if you have a dremel I'd be all over that.. well as long as I figure out what the dust boot on the coilovers are. So sick of squeak squeak.. also need to do a little on my inside boot - gotta be easier to get it out of ricer-park easier
Originally Posted by nindoo
I just went downtown and I was on Cressent street and I saw the 2006 civic si concept. It looked amazing, amazing lines. Thats one sick crazy car.
Nah its all good, I did the same this afternoon. Just need to shoot back to my brother's to get the pictures. Personally I still am not feeling the wheels - both the size and the look. Also still 
that its using halogen not hid - or at least on the more noticeable bulb, not sure about the smaller inner one - looked too dark to get a good look. Registered!!
iTrader: (1)
Joined: Jul 2002
Posts: 2,699
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 0 Went yesterday after I saw you at julep. The word concept goes well with it's title, there is nothing underneath the car(no exhaust,no swaybars, etc) so it's pretty much just a shell. Nice looking though.
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
What no pictures from you? Nah its all good, I did the same this afternoon. Just need to shoot back to my brother's to get the pictures. Personally I still am not feeling the wheels - both the size and the look. Also still that its using halogen not hid - or at least on the more noticeable bulb, not sure about the smaller inner one - looked too dark to get a good look.
Nah its all good, I did the same this afternoon. Just need to shoot back to my brother's to get the pictures. Personally I still am not feeling the wheels - both the size and the look. Also still that its using halogen not hid - or at least on the more noticeable bulb, not sure about the smaller inner one - looked too dark to get a good look.http://www.7thgencivic.com/forums/sh...d.php?t=215712
You got to go check it out in person, its got a freaking low roofline lows crazy with its new muscular shape.
Bush fu(king party,mother fu(king hand job.
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
Joined: Jul 2004
Posts: 13,956
Likes: 0
From: All over! ima gypsy!
Rep Power: 405 
Hey folks!
If you're interested theres a show in NIagara Falls on Sat.July 16th at Fireman's Park! All of the Niagara crew will be there reppin and it'd be killer if any of you could make it! Pre-Reg is $15.00 and if interested PM me the following info:
Name:
Address:
Postal Code:
Phone #:
Car year/make/model:
And i can fill out the forms and hand 'em in and spot you the $15 till that day.
Other option is to register the day of, it's $20 tho and although im sure they'll be room i can't make any guarantees, as it's sponsored by Automotive Warehouse and it's a pretty well known show.Oh and it runs from 10am-5pm.
Any info regarding the show will be found in this thread:: http://www.7thgencivic.com/forums/sh...d.php?t=214999
Hope you can make it!!
i know you guys would have a long trek but its worth it! It's Niagara falls!!Stick around and we can make a day of it and grab some grub afterwards or something! as soon as the sun goes down i can promise sketchy middle aged men in mustangs trying to race you and 50 yr old hookers galore!!
it shall be scandalously fun!
If you're interested theres a show in NIagara Falls on Sat.July 16th at Fireman's Park! All of the Niagara crew will be there reppin and it'd be killer if any of you could make it! Pre-Reg is $15.00 and if interested PM me the following info:
Name:
Address:
Postal Code:
Phone #:
Car year/make/model:
And i can fill out the forms and hand 'em in and spot you the $15 till that day.
Other option is to register the day of, it's $20 tho and although im sure they'll be room i can't make any guarantees, as it's sponsored by Automotive Warehouse and it's a pretty well known show.Oh and it runs from 10am-5pm.
Any info regarding the show will be found in this thread:: http://www.7thgencivic.com/forums/sh...d.php?t=214999
Hope you can make it!!
i know you guys would have a long trek but its worth it! It's Niagara falls!!Stick around and we can make a day of it and grab some grub afterwards or something! as soon as the sun goes down i can promise sketchy middle aged men in mustangs trying to race you and 50 yr old hookers galore!!
it shall be scandalously fun! Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 
That must have been a fun discovery to say the least, nindoo. Kinda like mine , but apparently thats not as bad as I thought - as after cleaning up the underneath no oil leak was present.. well see after this rain if I'm still leaking or not though. Welcome to the club Redviking
Unfortunately I'm not interested, but I'm sure if you want to sell it, someone out there (probably be better off with Canada For Sale section) would be willing to grab it.Hello again Sare .. though its a tempting offer, its a wee bit of a trek for sure. It definitely would not be a one day deal - because well thats almost a full day driving in itself (there and back). And its a little too close to DKN7 so doubtful - at least from my end. Though then again, its doubtful I hit up DKN7 as well.
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
That must have been a fun discovery to say the least, nindoo. Kinda like mine ,Yeah I'm only @ 35,000 kilos, is the car suppose to fall apart like that. I drive it too fast on the turns I suppose.
Last edited by nindoo; Jun 14, 2005 at 08:00 PM.
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 WTF?! Maybe its you discovering one of the great 01s made .. but not in my opinion for falling apart with only that many kilometers.
Bush fu(king party,mother fu(king hand job.
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
Joined: Jul 2004
Posts: 13,956
Likes: 0
From: All over! ima gypsy!
Rep Power: 405
Originally Posted by Karumba
Hello again Sare .. though its a tempting offer, its a wee bit of a trek for sure. It definitely would not be a one day deal - because well thats almost a full day driving in itself (there and back). And its a little too close to DKN7 so doubtful - at least from my end. Though then again, its doubtful I hit up DKN7 as well.
Registered!!
iTrader: (4)
Joined: Apr 2004
Posts: 831
Likes: 0
From: Montreal, Qc, Canada
Rep Power: 0 
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 Good luck with the sale Redviking.
What's the word back from the garage nindoo?
Seeing how its today.. how was CarFever - for anyone that went or showed *cough SUPERFLY cough* ?
What's the word back from the garage nindoo?
Seeing how its today.. how was CarFever - for anyone that went or showed *cough SUPERFLY cough* ?
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
What's the word back from the garage nindoo?
. 
Hey guys.......just got my car detailed yesterday. SICK! It was a four step process, glaze, compound, selant, and wax. It looks new, just the way i remember picking it up almost 3yrs ago. If you guys are interested, let me know. Price you ask???? I got quoted 225+ from other people, his price.......$175. Not one scratch, not one swirl, silky smooth.
When are we going to have a 7thgen meet?!?!?!? Lets get something going. After the St-Jean weekend im free.
When are we going to have a 7thgen meet?!?!?!? Lets get something going. After the St-Jean weekend im free.
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by XxJDMCivicxX
01 EBP Coupe going to honda monday being changed for 05 4 door NBP .
. At least the EBP would hide it another day maybe How's the EG though? That price jack on the clutch still stand or what?
Originally Posted by nindoo
Honda replaced the left 1/2 shaft seal. I'm not really sure what piece this but as long as it fixed... .
.
(bring in money with using the money as the form)
Originally Posted by steve_civic03
When are we going to have a 7thgen meet?!?!?!? Lets get something going. After the St-Jean weekend im free.
Though if anyone wants a meet during the St-Jean weekend - I'll suggest taking a trip to Ottawa and hanging out with the crew at Viper's BBQ. But well, for locally - honestly someone rattle off a date.Oh, and I'll view the car sometime this week to see the job in person. As its a far trip and all for me to see it
=-=-=
Oh, before I forget.. I'm actually a little
happy right now. Got off my lazy *** and put my altezza grill on. Also resealed my driver side headlight (and cleaned out the spider web). Would have done the passenger, but well let's just say I ran out of time (don't exactly want to show my mother that I'm putting a headlight into the oven 
) but truthfully, I don't think its worth the hassle. One side was enough - and I don't even know if it'll hold up or not. Last edited by Karumba; Jun 19, 2005 at 11:34 PM.
Registered!!
iTrader: (1)
Joined: Jul 2002
Posts: 2,699
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 0 Nice pics Vis the kit looks hot .
Karim - Why black cuz for some reason my mom didn't want the gunmetalish color
. I'm thinking of turning it into my show car hehe.
.Karim - Why black cuz for some reason my mom didn't want the gunmetalish color
. I'm thinking of turning it into my show car hehe. Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 Wow .. 6 days old. Summer is killing our thread
Alright, so let's bump this thread with a question --
what day would be better for a meet for everyone here - July 9 or July 16?
They are both Saturdays, and I'm assuming an afternoon time frame for a meet/greet - possibly cruise/chill, possibly supper, possibly discuss things to do Also planning to ask the Ottawa gang if they feel like stopping in to meet & greet basically - as we talked about this slightly at Viper's BBQ ( great time)
So let's get some chatter going.. bunch of you wanted another meet anyways so let's hear from you
Alright, so let's bump this thread with a question --
what day would be better for a meet for everyone here - July 9 or July 16?
They are both Saturdays, and I'm assuming an afternoon time frame for a meet/greet - possibly cruise/chill, possibly supper, possibly discuss things to do
Also planning to ask the Ottawa gang if they feel like stopping in to meet & greet basically - as we talked about this slightly at Viper's BBQ ( great time)So let's get some chatter going.. bunch of you wanted another meet anyways so let's hear from you
Registered!!
iTrader: (4)
Joined: Apr 2004
Posts: 831
Likes: 0
From: Montreal, Qc, Canada
Rep Power: 0 Shaved (removed) my rear emblems today (civic+special edition). Still don't know what to do with the H. I don't want 2 holes on the trunk, no money to fill and paint them...
Any good idea?
Karumba did you painted your H? How does it look?
I will see for the meets!
Any good idea?
Karumba did you painted your H? How does it look?
I will see for the meets!
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by Redviking
Shaved (removed) my rear emblems today (civic+special edition). Still don't know what to do with the H. I don't want 2 holes on the trunk, no money to fill and paint them...
Any good idea?
Karumba did you painted your H? How does it look?
I will see for the meets!
Any good idea?
Karumba did you painted your H? How does it look?
I will see for the meets!
