MONTREAL area: General Discussion
SUMMER MODE: Part 1
Full interior detail was performed yesterday... a good 3hrs to clean the carpet
(soooo much salt and sand) and dash cleaner...
followed by vaccumming everything... and conditionning the leather.
Installed 7thgencivic.com rear license plate cover
PART 2 is next week...
Rim Install
Touch-up on the rear bumper....
Full Wash/wax
Polish Exhaust Tip
Full interior detail was performed yesterday... a good 3hrs to clean the carpet
(soooo much salt and sand) and dash cleaner...
followed by vaccumming everything... and conditionning the leather.
Installed 7thgencivic.com rear license plate cover
PART 2 is next week...
Rim Install
Touch-up on the rear bumper....
Full Wash/wax
Polish Exhaust Tip
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 
Originally Posted by FaZe
SUMMER MODE: Part 1
Full interior detail was performed yesterday... a good 3hrs to clean the carpet
(soooo much salt and sand) and dash cleaner...
followed by vaccumming everything... and conditionning the leather.
Installed 7thgencivic.com rear license plate cover
Full interior detail was performed yesterday... a good 3hrs to clean the carpet
(soooo much salt and sand) and dash cleaner...
followed by vaccumming everything... and conditionning the leather.
Installed 7thgencivic.com rear license plate cover
I know mine are salty and not sure.. thinking about spending a few bucks and renting a steam cleaner (need to take out a stain or two in the headliner as well - don't ask me, it looks like embedded lipstick (and I bought it like that)). Don't know if another way would work - ie use water+vinegar/by drowning them..
I need pointers 
Lastly, hopefully when you get pulled over (as you know you will for that muffler
) you don't get a ticket for the cover. 
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294 ^-- As per our MSN conversation.
Yes .. and should have gone local - Upper Performance <- vendor on MR.com sells them for a little bit cheaper than what I paid.
And as we discussed, more than willing to meet up this Sunday night sometime .. and if anyone else wants to join I have no problems
As long as the weather cooperates
Yes .. and should have gone local - Upper Performance <- vendor on MR.com sells them for a little bit cheaper than what I paid.
And as we discussed, more than willing to meet up this Sunday night sometime .. and if anyone else wants to join I have no problems
As long as the weather cooperates 
Registered!!
Joined: Apr 2003
Posts: 258
Likes: 0
From: Joliette
Rep Power: 0
Originally Posted by nindoo
I seen a sexy black veloz on cote vertu today. Was it any of you. It was around 11:15am.
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by SUPERFLY
Spring is in the air, you guys are lucky to be washing your rides and drive around, I'd kill for a ride these days, sick of the 78 HP Tercel. 2-3 weeks to go...
Remind me never to use the crappy soap that my father picked up Car looks like swirl city now because that soap was so runny. I feel like polishing and waxing it now, but I don't think I should before it goes to get its paint touched up Oh well, hopefully I'll take care of that stuff next week and then start on the summerizing part..
But
going another 2-3 weeks without your car .. you are definitely dedicated to the go aspect. I'm sure you'll enjoy yourself when its all ready (after being broken in ) 
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
^-- As per our MSN conversation.
Yes .. and should have gone local - Upper Performance <- vendor on MR.com sells them for a little bit cheaper than what I paid.
And as we discussed, more than willing to meet up this Sunday night sometime .. and if anyone else wants to join I have no problems As long as the weather cooperates
Yes .. and should have gone local - Upper Performance <- vendor on MR.com sells them for a little bit cheaper than what I paid.
And as we discussed, more than willing to meet up this Sunday night sometime .. and if anyone else wants to join I have no problems
As long as the weather cooperates Great I emailed them. I'll put up the name of this place I called last week. I have their number @ home. They are from Sainte Eustache. They have a racing school and they sell parts as well. I found there prices very reasonable.
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by nindoo
Great I emailed them. I'll put up the name of this place I called last week. I have their number @ home. They are from Sainte Eustache. They have a racing school and they sell parts as well. I found there prices very reasonable.
Though what are you in the market for?
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
yeah I thikn its them.
Neuspeed sports and Tokico hps.
They didn't have tokico hps but they had KYB GR2s.
210 for the springs and 4something for the shocks I forget. I wrote it down at home.
I'd rather have the tokicos than KYBs that's why I emailed the link you put up.
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by SUPERFLY
If it's mine someone stole it from the speed shop and is driving without the head and cam!
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by nindoo
Neuspeed sports and Tokico hps.
They didn't have tokico hps but they had KYB GR2s.
210 for the springs and 4something for the shocks I forget. I wrote it down at home.
I'd rather have the tokicos than KYBs that's why I emailed the link you put up.
They didn't have tokico hps but they had KYB GR2s.
210 for the springs and 4something for the shocks I forget. I wrote it down at home.
I'd rather have the tokicos than KYBs that's why I emailed the link you put up.
Originally Posted by nindoo
AZNSilverSedan do you off Gouin?
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
No plans on camber kitting the ride as well? I'd be worried about about the alignment after the drop .. as I will be, if/when I decide what in fact I want to drop with..
I'm waiting for my friend to come back from his honeymoon. I'll install the progress sway bar and tie bar with him around. If I am succcessful without any problems I'll let you know if its a driveway project. I had my friend put on the bar before winter, but it was on upside down, and we didn't bolt in the tie bar
(it was really late like 10:00pm so I didn't take it off) . So we took off the bar the next day and put it on the right way but I didn't want to keep the bar on without the tie bar. I didn't want to damage the frame of the car. So now it is summer and I hope to do it myself, but with my friend around.
Originally Posted by Karumba
You both live around Gouin from what I remember.. though I can be a little more specific on you only because of the picture you once posted
You were right the dude I talked to was from trac racing
Carl
450-472-0676 ext303
and he said 425 for the kyb GR2s and 210 for the neuspeed sports. Plus tax.
Do you think thats a good price?
Last edited by nindoo; Mar 29, 2005 at 04:47 PM.
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by DnarahP
How all the Montreal people doing today? 
I felt like floating around today. I think now I'll go check out the SoCaL thread
I felt like floating around today. I think now I'll go check out the SoCaL thread
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by nindoo
I bought an ingalls rear camber kit. But I'm not sure 'll be getting camber bolts for the front. I heard they don't retain their settings during hard driving, and its better to get camber plates(= more $$). Would you invest in the front kit as well?
I'm waiting for my friend to come back from his honeymoon. I'll install the progress sway bar and tie bar with him around. If I am succcessful without any problems I'll let you know if its a driveway project. I had my friend put on the bar before winter, but it was on upside down, and we didn't bolt in the tie bar (it was really late like 10:00pm so I didn't take it off) . So we took off the bar the next day and put it on the right way but I didn't want to keep the bar on without the tie bar. I didn't want to damage the frame of the car. So now it is summer and I hope to do it myself, but with my friend around.
I'm waiting for my friend to come back from his honeymoon. I'll install the progress sway bar and tie bar with him around. If I am succcessful without any problems I'll let you know if its a driveway project. I had my friend put on the bar before winter, but it was on upside down, and we didn't bolt in the tie bar
(it was really late like 10:00pm so I didn't take it off) . So we took off the bar the next day and put it on the right way but I didn't want to keep the bar on without the tie bar. I didn't want to damage the frame of the car. So now it is summer and I hope to do it myself, but with my friend around. Definitely going with a rear set for sure.. as for the front, all depends on how badly it'd need to be adjusted during the alignment if anything.Sounds like you had some fun last summer .. though anything can be a driveway project (or so I've been told) with the right tools. I can guarantee I don't have them but saying still holds I guess. In any event, I'd like to be kept updated if it doesn't bother you
Originally Posted by nindoo
And you were from somewhere near where the Decarie hits the metropolitan and there is the automax dealership and toyota dealership around. Or am i completely off. This is a complete guess by the way.
Not even close .. sounds more like xXxJDMCivicxXx if anyone.I'm like 5 minutes from you if that - backyard is touching Pierrefonds in the Lacey Green district (across the street from the Timmies at Antoine Faucon).
Originally Posted by nindoo
and he said 425 for the kyb GR2s and 210 for the neuspeed sports. Plus tax.
Do you think thats a good price?
Do you think thats a good price?
Don't really know.. haven't been asking about springs/shocks - mainly just B&Gs. Thinking I could/should change that aspect.. but well still iffy. Though be like me, grab the contact infos off all the Montrealracing.com vendors and fill their inboxes Course probably is easiest going from place to place to get an immediate answer but thats time and gas consuming 
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by DnarahP
How all the Montreal people doing today?
I felt like floating around today. I think now I'll go check out the SoCaL thread
I felt like floating around today. I think now I'll go check out the SoCaL thread
Not even the London thread first? 
Glad you finally learnt how to curse Now don't go showing everyone Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
Not even close .. sounds more like xXxJDMCivicxXx if anyone.I'm like 5 minutes from you if that - backyard is touching Pierrefonds in the Lacey Green district (across the street from the Timmies at Antoine Faucon).
Originally Posted by Karumba
Sounds like you had some fun last summer .. though anything can be a driveway project (or so I've been told) with the right tools. I can guarantee I don't have them but saying still holds I guess. In any event, I'd like to be kept updated if it doesn't bother you
Last edited by nindoo; Mar 29, 2005 at 05:15 PM.
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by nindoo
Oh snap! that's probabaly like 3:30 mins from me. I'm right at the end of st-charles
Originally Posted by nindoo
well if I don't need a torque rench or jack stands and I'm successful I could help you install yours. But thats a lot of ifs, thats why I never offered my help before. Its kinda of an empty help, which isn't nice.
) But in any event the offer to help is better than nothing at all. At least it can give me hope Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by Karumba
Lies lies, .. okay, so perhaps this statement could be finished in pm.
No jack stands? You guys going to crawl under on your backs or just use the shitty car jacks? I believe I have access to my brother's car ramps .. though I don't know if they'd work for the rear wheels (he mainly used them for the fronts to my knowledge. Might hit the rear bumper ) But in any event the offer to help is better than nothing at all. At least it can give me hope
No jack stands? You guys going to crawl under on your backs or just use the shitty car jacks? I believe I have access to my brother's car ramps .. though I don't know if they'd work for the rear wheels (he mainly used them for the fronts to my knowledge. Might hit the rear bumper
) But in any event the offer to help is better than nothing at all. At least it can give me hope I meant 3 mins and 30 senconds. I got the SI you know
Thread Starter
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by nindoo
I meant 3 mins and 30 senconds. I got the SI you know
Hey boys...sorry i havent been on that often...too much friggin school work to do. SOOO much has been posted since the last time i posted! LOL Dont know what to add but i'll just say that i finally did my spring cleaning this past weekend! 
Took me quite a long time actually...but its all worth it. Cant wait till i put on my front and side skirts...and also my lights! BUT the sad part is im still looking for a rear lip Karumba and Faze...whens the next time u guys are gonna head over to the scrap yard, I would like to join 
See if there's any good silver 7thgens sitting around Im also looking to change my chrome front (at the front of the hood) and rear (top of license plate) pieces and change them to SSM ones WELL...that was a little update from me, i'll check back tmw
SOOO much has been posted since the last time i posted! LOL Dont know what to add but i'll just say that i finally did my spring cleaning this past weekend! Took me quite a long time actually...but its all worth it. Cant wait till i put on my front and side skirts...and also my lights! BUT the sad part is im still looking for a rear lip Karumba and Faze...whens the next time u guys are gonna head over to the scrap yard, I would like to join See if there's any good silver 7thgens sitting around Im also looking to change my chrome front (at the front of the hood) and rear (top of license plate) pieces and change them to SSM ones WELL...that was a little update from me, i'll check back tmw OHH ya, btw...i saw a blue civic sedan with some chromes (i think ?? 
) at the light while i was turning onto the street where Wal-Mart is. Dunno if its anyone of u guys ?? I believe the driver has a shaved head...not too sure, was a quick glance
) at the light while i was turning onto the street where Wal-Mart is. Dunno if its anyone of u guys ?? I believe the driver has a shaved head...not too sure, was a quick glance
Originally Posted by 03AzNsIlvaSeDaN
Hey boys...sorry i havent been on that often...too much friggin school work to do. SOOO much has been posted since the last time i posted! LOL Dont know what to add but i'll just say that i finally did my spring cleaning this past weekend! Took me quite a long time actually...but its all worth it. Cant wait till i put on my front and side skirts...and also my lights! BUT the sad part is im still looking for a rear lip Karumba and Faze...whens the next time u guys are gonna head over to the scrap yard, I would like to join See if there's any good silver 7thgens sitting around Im also looking to change my chrome front (at the front of the hood) and rear (top of license plate) pieces and change them to SSM ones WELL...that was a little update from me, i'll check back tmw
SOOO much has been posted since the last time i posted! LOL Dont know what to add but i'll just say that i finally did my spring cleaning this past weekend! Took me quite a long time actually...but its all worth it. Cant wait till i put on my front and side skirts...and also my lights! BUT the sad part is im still looking for a rear lip Karumba and Faze...whens the next time u guys are gonna head over to the scrap yard, I would like to join See if there's any good silver 7thgens sitting around Im also looking to change my chrome front (at the front of the hood) and rear (top of license plate) pieces and change them to SSM ones WELL...that was a little update from me, i'll check back tmw well .. we do go to the same school, so we could meet up easily... so after exam periods.. i'll gradly go with you... i believe they do have a rear SSM lip..
apart from that... who has a rad cover for sale (FOR SEDAN)
Why is my vagina bleeding?
iTrader: (1)
Joined: Mar 2004
Posts: 3,582
Likes: 0
From: Montreal
Rep Power: 304
Originally Posted by 03AzNsIlvaSeDaN
Hey boys...sorry i havent been on that often...too much friggin school work to do. SOOO much has been posted since the last time i posted! LOL Dont know what to add but i'll just say that i finally did my spring cleaning this past weekend! Took me quite a long time actually...but its all worth it. Cant wait till i put on my front and side skirts...and also my lights! BUT the sad part is im still looking for a rear lip Karumba and Faze...whens the next time u guys are gonna head over to the scrap yard, I would like to join See if there's any good silver 7thgens sitting around Im also looking to change my chrome front (at the front of the hood) and rear (top of license plate) pieces and change them to SSM ones WELL...that was a little update from me, i'll check back tmw
SOOO much has been posted since the last time i posted! LOL Dont know what to add but i'll just say that i finally did my spring cleaning this past weekend! Took me quite a long time actually...but its all worth it. Cant wait till i put on my front and side skirts...and also my lights! BUT the sad part is im still looking for a rear lip Karumba and Faze...whens the next time u guys are gonna head over to the scrap yard, I would like to join See if there's any good silver 7thgens sitting around Im also looking to change my chrome front (at the front of the hood) and rear (top of license plate) pieces and change them to SSM ones WELL...that was a little update from me, i'll check back tmw 
