Full Review on Hayame Coilovers
wheres the pics of these on someones car? i still haven't seen any, how low do these lower by the way? i wanna be all the way down on my 215/45/17 tires. i want it to be maybe a finger gap or less if possible.
Thread Starter
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 418 
you'll definitely be able to tuck with 215-45-17s.. right now in the rear i have no gap but i can still go 1.5-2" lower
the front i'm not sure but i know i can atleast go another 1"... well only if i didnt rub that is
alpinecivic02 has pictures of them in his members ride
the front i'm not sure but i know i can atleast go another 1"... well only if i didnt rub that is
alpinecivic02 has pictures of them in his members ride
Thread Starter
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 418 Its on my first post.. you can get them from www.urbanimport.com for $650 shipped with the coupon code 'hayamegb'
I just put my stock wheels back on because my dad needs to drive my car on n off for the next two week and I have to say the ride is very close to stock even at a 2.25/2.5" drop
I just put my stock wheels back on because my dad needs to drive my car on n off for the next two week and I have to say the ride is very close to stock even at a 2.25/2.5" drop
Thread Starter
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 418 Ya i did it by myself with the stock jack(i know not smart but hey it worked)
Install was pretty easy. Would have been easier if i had help but i couldnt wait to get them on my car... if your installing them and run into some trouble i'll give you my number and you can call.
Install was pretty easy. Would have been easier if i had help but i couldnt wait to get them on my car
... if your installing them and run into some trouble i'll give you my number and you can call. 
Registered!!
Joined: Feb 2003
Posts: 265
Likes: 0
From: Rollinsford, New Hampshire, US
Rep Power: 0 If I have never worked on suspension components before, but am fairly knowledgeable on how its works with install and everything, do you think I will be able to install them myself?
Just a headsup, we are throwing a GB
http://www.7thgencivic.com/forums/sh...88#post1716188
http://www.7thgencivic.com/forums/sh...88#post1716188
Originally posted by VNlilMAN
Ya i did it by myself with the stock jack(i know not smart but hey it worked)
Install was pretty easy. Would have been easier if i had help but i couldnt wait to get them on my car... if your installing them and run into some trouble i'll give you my number and you can call.
Ya i did it by myself with the stock jack(i know not smart but hey it worked)
Install was pretty easy. Would have been easier if i had help but i couldnt wait to get them on my car
... if your installing them and run into some trouble i'll give you my number and you can call. 
Originally posted by tripledoublegs
I still didn't get mine, even though I ordered it thursday, and got an email saying they shipped it thursday night. WTF??
I still didn't get mine, even though I ordered it thursday, and got an email saying they shipped it thursday night. WTF??
Registered!!
Joined: Mar 2003
Posts: 133
Likes: 0
From: nor Cal
Rep Power: 0 Originally posted by DogstyleEX
ok.. never mind.. these are teins
6.0K/8.0K-336LBS/448LBS
KW's
Type II (DC5,EP3) 350F/500R
3 locknuts, these are my coilovers..
ok.. never mind.. these are teins
6.0K/8.0K-336LBS/448LBS
KW's
Type II (DC5,EP3) 350F/500R
3 locknuts, these are my coilovers..
What company makes these there very nice just lookin into coilovers.......two days after i put on nuespeed sports ha kinda funny hould have done coilovers to start with. I like what i have heard about these hayame so maybe.......
7 gen 03
Thread Starter
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 418 The ones pictures above are to'ser(something like that) and are sold in singapore. The guy went there and bought some and brought it back over.
Registered!!
Joined: Nov 2003
Posts: 244
Likes: 0
From: CT
Rep Power: 0 Yeah I can help too feel free to call me.DareDebil911, do you feel confident? know how to use air tools? Have a lift? I did mine on lift with airtools and it took me less than 1 1/2 hours. If you feel you might be puzzled have them professionally installed.
Thread Starter
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 418 blah i didnt have air tools or a lift so it took me about 3-4 hours. Blah the stripped bolt I had from the last install didnt help either...
Registered!!
Joined: Dec 2003
Posts: 24
Likes: 0
Rep Power: 0 I need help. I put the hayame coilovers on yesterday and then today when i drive i here a clanking or creking noise coming from the right rear. And it is bad when i hit little bumps in the road. Does anyone know what the problem is. I checked and everything seams tight enough. I was thinking not enough preload, but not sure any help would be nice.
Thread Starter
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 418 Ya check everything including the 3 nuts in the trunk,
the bottom mount
the 3 locknut.
and ya make sure theres a preload so that when you jack the car up, its kinda hard to spin the spring
the bottom mount
the 3 locknut.
and ya make sure theres a preload so that when you jack the car up, its kinda hard to spin the spring
