My KMS P&P head
Registered!!
iTrader: (8)
Joined: Mar 2003
Posts: 3,024
Likes: 1
From: Zulu Alpha Tango Foxtrot
Rep Power: 312 
Originally Posted by jrock2324
I am getting it dyno next week.
As far as the 74mm TB - I wouldn't put that on - WAAYYYYY to big for what power you're putting out....
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 
I'm selling my stock bored TB. It just was killing my low end cause the car is stock except for head work. It's a VERY nice bore job. About 3mm over stock on top, and 2mm on the bottom. It matches the IM opening perfectly. Should be great for boosted cars. Cost me $165 for the TB and bore work, so I'm looking to get like $120 shipped. There are pics in another thread.
Joined: Mar 2003
Posts: 2,351
Likes: 0
From: Houma, Louisiana
Rep Power: 305 damn gearbox, having a hard time with moddin lately huh? I too notice a slight loss in low end from the throttle body but i also see a pretty nice pull around 3500-4000 rpms on up. I could understand how the automatic would react to a loss in low end considering it barely has any. To anyone looking to buy this I'd say it's a good deal your basically paying $20 for a throttle body and you dont have to pay shipping to send it out to get bored. 5-speed owners should get in on this.
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 I already sold it to canadian2k1si. I might be considering the fipk again, but it would mean buying a better filter to use it. I donno. I'll probably stay stock for now.
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 Nope. None of us have the time. I finally found a place that might do it, but it's gonna take a miracle for me to drive up 3hrs on a weekday so they can dynotune everything all day.
i feel you gearbox nearest place to me is about 2 hours. i just my vafc2 tuned but i guess i am going to wait until nest year when i get my head worked on. hopefully crower will come through for us.
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 I have about 4 places within about 25 minutes of me. I am lucky, but no need to dyno tune yet. I just searched, there are some kick a** shops that do some good work around me. I have seen some of the cars driving around, and they are faaaaast.
http://www.hondaswap.com/locator/index.php
Try this out, it has lots of places for all states. Import Power House(Hybrid Swaps) looks pretty tight to me, they are down the street.
http://www.hondaswap.com/locator/index.php
Try this out, it has lots of places for all states. Import Power House(Hybrid Swaps) looks pretty tight to me, they are down the street.
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 I dont think anybody has ever posted a dyno on a N\A motor. I would like to know the same thing. If it does give the 20-30 hp people think, I would def. do it. Better gains than exhaust, header, intake, and those are more money (sometimes).
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 I have been watching this thread for a long time, they will never post any numbers, or get their car dyno'd. If they do, Good job, but I doubt it will happen soon. Nobod gives any sort of info. Whats up with the butt dyno. Is it much more noticeable than i/h/e? ANSWERS?? thank you -Chris
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 If you get it done right, then it works. I think mine was done wrong, so I'm not saying anything. Eventually I'll find time to get it dynoed. One member had his car done and got almost 140whp, which is alot imo for pnp, i/h/e, tuning, and some other stuff.
arp headstuds for $101 bucks shipped. i got them from here. they work for our engines as well. i just got my PnP head, 4 angle valve job, manley valves and springs installed.
wiredspeedlab.com----- order from here
ARP-208-4301 Honda D-16 10mm $89.00(make sure you get Z not Y) and tell them its for ur 7thgen. they hooked me up right. talk to alex.
wiredspeedlab.com----- order from here
ARP-208-4301 Honda D-16 10mm $89.00(make sure you get Z not Y) and tell them its for ur 7thgen. they hooked me up right. talk to alex.
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 I forgot about this thread. I know an awesome shop that could do this work for me. Just contemplating on what all to do next. How much did this cost ya jrock? 1siksivik, hows your car running? much more noticeable gains?
