Team Capital 7's
Thread Starter
iTrader: (8)
Joined: Oct 2002
Posts: 6,730
Likes: 0
From: Colorado USA
Rep Power: 354 
D, i though u were supposed to be in montreral on sunday, i parked behind u downtown.
oh yeah tek, i once heard u bragging about how good u r at graphics design, so were is our banner??????
oh yeah tek, i once heard u bragging about how good u r at graphics design, so were is our banner??????
i got them from goldwing autocare. They gave me a really good deal. I went to pearl and they quoted my like 380 without taxes. I got them the next day for 280 taxes in. Im very excited to install them, hopefully it wont be too much of a bitch. any tips from anyone???
Ask me about your mom.
Joined: Jul 2002
Posts: 2,563
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 315 Originally posted by 1983
trying to be like tek
trying to be like tek heheheBaller: patience. that's all I can suggest
Start with the hardest part first: the outside lights (not on the trunk). If you're feeling up to it, it would be a LOT easier if you take off the back bumper. It's the same idea as the front one: a bunch of ghey little clips, and two screws in the fender well.
Once you have those ones done, the other ones take at MOST 3 minutes (no joke).
You just have to peel back the carpet to get at the non-trunk ones, and then get under the car and reach WAY up to the bolt that holds the bottom in. That's the one bolt that causes the biggest and only headache.
Player: bitch! When I'm not at work, I'm at school, or at home studying. My physics exam is tomorrow
That's not gonna be fun! Then again, it IS just a first year course...so it shouldn't be impossible. Especially for someone who is aiming at 50%
heheheheI just need these courses to graduate. My GPA is pretty high, so a couple of courses at a D- won't hurt me much!
It's all about aiming low!!!
hehehehe You usually exceed your expectations, which always feels good 
Joined: Apr 2002
Posts: 26,704
Likes: 0
From: Poco, B.C. Canada
Rep Power: 564 
Congrats Team, we're on our way to locking our 2nd thread...lol.
Baller: Nice lights man, good choice..
Tek: Resume is lookin sweeeeeeeeeeeeet!
And Everyone: It's official, I'm gonna build the K20A3, otherwise known as the EP3 SiR.
Baller: Nice lights man, good choice..
Tek: Resume is lookin sweeeeeeeeeeeeet!
And Everyone: It's official, I'm gonna build the K20A3, otherwise known as the EP3 SiR.
pharoh: I hope everything works out nicely for you. When its all done it will be game over for someone. Just pick a car....almost ANY car....and deal with them!!! hahaha i will be proud to own a 7th gen!!
Ask me about your mom.
Joined: Jul 2002
Posts: 2,563
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 315 great choice, Pharoh!
lemme know when/where you're doing it.
If I have time to save money for it, we should see if we can get a 2 for 1 kinda deal
I think LilJoe really struck home when he mentioned the lower compression of the K20A3. Great point!
so, it's a lot better starting point for a turbo setup.
LilJoe: you da man!
Plus, if you don't wanna go the turbo route, you can easily modify the engine to the type-s parts, and have a better engine than the K20A2!
damnit man, you're makin me jealous
lemme know when/where you're doing it.
If I have time to save money for it, we should see if we can get a 2 for 1 kinda deal
I think LilJoe really struck home when he mentioned the lower compression of the K20A3. Great point!
so, it's a lot better starting point for a turbo setup.
LilJoe: you da man!
Plus, if you don't wanna go the turbo route, you can easily modify the engine to the type-s parts, and have a better engine than the K20A2!
damnit man, you're makin me jealous
Registered!!
Joined: Jun 2003
Posts: 458
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 0 Seriously......That is gonna be one mean civic.
1983 : Any ideas on what rimsyou want?? What style are you lookin' @ ??
Baller : Good luck with those lights today. Give me call and let me know how it went. I bolted in my new horn last night. AS soon as I get off work I'm going to do the wiring part.
Did anyone else hear about the DAMN RAIN their callin' for??? It better hold off this weekend!!
1983 : Any ideas on what rimsyou want?? What style are you lookin' @ ??
Baller : Good luck with those lights today. Give me call and let me know how it went. I bolted in my new horn last night. AS soon as I get off work I'm going to do the wiring part.
Did anyone else hear about the DAMN RAIN their callin' for??? It better hold off this weekend!!
Drifting away in time and space...
iTrader: (2)
Joined: Aug 2001
Posts: 2,590
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 327 By the way, i ordered some Motegi's MR3 gunmetals last weak off ebay. I should be getting em this weak! They are gona look so awesome on my car i can't wait to get em!!
Ask me about your mom.
Joined: Jul 2002
Posts: 2,563
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 315 freddy: sweet! those look pimp!
everyone: all I care about is being able to beat a somewhat stock WRX. that's it.
that way I can beat this guy at work in a straight line OR in the twisty's!
mmm...twisty's.
Edit:
oh yeah, the base RSX engine (K20A3) is $4000 from Chassel (montreal). as of RIGHT NOW, they have one in stock. i forgot to ask if it came with the transmission, ecu, etc.
oh, and I guess we'd have to buy axles from an SiR as well. hrm. that's not very cheap.
some guy wants $5500 CAD for the type-s engine/tranny/axles/etc.
hrm. this is gonna require some serious researching. which is good, because I won't be able to afford the swap for a while
everyone: all I care about is being able to beat a somewhat stock WRX. that's it.
that way I can beat this guy at work
in a straight line OR in the twisty's!mmm...twisty's.
Edit:
oh yeah, the base RSX engine (K20A3) is $4000 from Chassel (montreal). as of RIGHT NOW, they have one in stock. i forgot to ask if it came with the transmission, ecu, etc.
oh, and I guess we'd have to buy axles from an SiR as well. hrm. that's not very cheap.
some guy wants $5500 CAD for the type-s engine/tranny/axles/etc.
hrm. this is gonna require some serious researching. which is good, because I won't be able to afford the swap for a while
Registered!!
Joined: Jun 2003
Posts: 458
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 0 Player : I'm right behind you in the OEM line man. Bit by Bit, we will get there!!!!!!
I feel like there is never enough done to my ride, but for some reason...I'm always broke from buying car stuff. wtf
All the post so far have some sickly sick ideas and sweet sweet parts. 7th Gen rocks!!
I feel like there is never enough done to my ride, but for some reason...I'm always broke from buying car stuff. wtf
All the post so far have some sickly sick ideas and sweet sweet parts. 7th Gen rocks!!
Joined: Apr 2002
Posts: 26,704
Likes: 0
From: Poco, B.C. Canada
Rep Power: 564 Don't worry all, when I get my ride you can all share in the fun....
Just like my ex girlfriend....Everyone gets a turn...lol.
Array, where abouts in town are you?
TeK: We need to pool our energy here and do some hardcore research on this swap.
Hopefully this weekends weather turns out well...
Freddy: Can you make it out this Friday?
Just like my ex girlfriend....Everyone gets a turn...lol.
Array, where abouts in town are you?
TeK: We need to pool our energy here and do some hardcore research on this swap.
Hopefully this weekends weather turns out well...
Freddy: Can you make it out this Friday?
well guys installation of the lights went like butter!! I picked them up at 12 and it only took me about an hour to do them. I like the look of them...they arent too much. As for friday i wont be able to make it....its my grad night!!!! HOLLA....so immma be a bit busy.....if u feel me.....hahah
is anyone gonna meet up on saturday.
array: sorry i didnt call u back....me and my friends didnt end up going anywere...pretty depressing night.
well now i need to start thinking about the next modification...hmmmm
is anyone gonna meet up on saturday.
array: sorry i didnt call u back....me and my friends didnt end up going anywere...pretty depressing night.
well now i need to start thinking about the next modification...hmmmm
Registered!!
Joined: Dec 2002
Posts: 587
Likes: 0
From: reppin da 613
Rep Power: 0 Originally posted by player
D, i though u were supposed to be in montreral on sunday, i parked behind u downtown.
oh yeah tek, i once heard u bragging about how good u r at graphics design, so were is our banner??????
D, i though u were supposed to be in montreral on sunday, i parked behind u downtown.
oh yeah tek, i once heard u bragging about how good u r at graphics design, so were is our banner??????
i was in mtl bit i didnt drove my car i left it in ottawa for my dad
Registered!!
Joined: Dec 2002
Posts: 587
Likes: 0
From: reppin da 613
Rep Power: 0 Originally posted by Array
1983 : Any ideas on what rimsyou want?? What style are you lookin' @ ??
[/B]
1983 : Any ideas on what rimsyou want?? What style are you lookin' @ ??
[/B]
i want the rs limited mase in 18'' they look exactly like the RH evo z5000 just cheaper and better looking
how much did everyone got their rims and tires for????
thanx
holla
Joined: Apr 2002
Posts: 26,704
Likes: 0
From: Poco, B.C. Canada
Rep Power: 564 Originally posted by Array
Pharoh : I live beside Bank & Hunt Club. I work just off St Laurent @ Belfast Rd. May I ask why you inquire???
Pharoh : I live beside Bank & Hunt Club. I work just off St Laurent @ Belfast Rd. May I ask why you inquire???
Registered!!
Joined: Jun 2003
Posts: 458
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 0 Originally posted by Pharoh
How much?
How much?
and 2 small rooms(9 x 8) - 1 @ $420 & 1 @ $430
If you're wondering....the price difference is because of location (north, east, south, west).
And yes, some are available....now!!
