DIY cluster swap 2003 - 2004 dx also available for other models
#1
Registered!!
Thread Starter
Join Date: Apr 2004
Location: houston tx
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 DIY cluster swap 2003 - 2004 dx also available for other models
This DIY is not very complete but has all information needed just misssing a few pics. I can also hook up any 03-04 cluster to a 01-02 civic. just ask me.
#3
Registered!!
Thread Starter
Join Date: Apr 2004
Location: houston tx
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 no its not a wire write up. discard this post the DIY i typed up with pics but comp went too slow but if you want it i send it to you by email. contact me at hi2nr@yahoo.com or the best way is to AIM me. my screen is hi2nr
#6
Registered!!
Thread Starter
Join Date: Apr 2004
Location: houston tx
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Here is what each wire does. The wire pinout i have to send it to you by email cause its in microsoft excel format.
GREEN Connector:
Blue: From ECM/PCM, Tach input signal
White/Red: Constant 12 v +
Yellow: Switched 12V+
Blue/White: From ECM/PCM And VSS input signal
Yellow/Black: From fuel level sending unit
White/Green: From multiplex control unit
Black: Ground
Pink: (Canada Vehicles only) Washer fluid level switch
White/Blue: (Canada Vehicles only) DRL Control unit
Black/Yellow: Security control unit
Blue/Yellow: Cruise control unit
Pink/Blue: OPDS unit (Side airbags)
BLUE Connector:
Black: Ground
green/orange: From ECM/PCM
Blue/Red: From ABS Control unit
Pink: From SRS unit
Red/Black: Supplies 12V+ for dash backlights
Red: Supplies switched ground for dash lights
Green/Red: Left turn signal indicator
Green/Yellow: Right turn signal indicator
Red/Blue: Combination light switch
Blue/Orange: Immobilizer control unit
Red/Yellow: From no 15 fuse under hood
White/Red: From no 9 fuse under hood
Yellow/Red: From oil pres switch
GREEN Connector:
Blue: From ECM/PCM, Tach input signal
White/Red: Constant 12 v +
Yellow: Switched 12V+
Blue/White: From ECM/PCM And VSS input signal
Yellow/Black: From fuel level sending unit
White/Green: From multiplex control unit
Black: Ground
Pink: (Canada Vehicles only) Washer fluid level switch
White/Blue: (Canada Vehicles only) DRL Control unit
Black/Yellow: Security control unit
Blue/Yellow: Cruise control unit
Pink/Blue: OPDS unit (Side airbags)
BLUE Connector:
Black: Ground
green/orange: From ECM/PCM
Blue/Red: From ABS Control unit
Pink: From SRS unit
Red/Black: Supplies 12V+ for dash backlights
Red: Supplies switched ground for dash lights
Green/Red: Left turn signal indicator
Green/Yellow: Right turn signal indicator
Red/Blue: Combination light switch
Blue/Orange: Immobilizer control unit
Red/Yellow: From no 15 fuse under hood
White/Red: From no 9 fuse under hood
Yellow/Red: From oil pres switch
#9
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 787 Oh not for me. I'm using my 02 cluster. But alot of other people were wanting it.
Acually I wouldn't mind having a copy. Can you e-mail it to here? Thanks alot...
berberoglu@yahoo.com
Acually I wouldn't mind having a copy. Can you e-mail it to here? Thanks alot...
berberoglu@yahoo.com
#10
Registered!!
Thread Starter
Join Date: Apr 2004
Location: houston tx
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 anyway if one of you guys need the wire pinout just email me. also the pinout is the most important part not what each wire does. the wire info i submitted above only helps if u want to screw around with the sensors or something. and it was a pain in the a$$ figuring it out.
#13
§C§H§O§C§O§B§O
iTrader: (6)
Join Date: May 2003
Location: San Diego
Age: 40
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 sent you e-mail
how much would a 2003-04 cluster run neway? i can't find any on e-bay >_<
neway, is this swap only for DX's? i have an 01 ex, so can i put an 03-04 ex cluster in?
wiring should be the same right?
how much would a 2003-04 cluster run neway? i can't find any on e-bay >_<
neway, is this swap only for DX's? i have an 01 ex, so can i put an 03-04 ex cluster in?
wiring should be the same right?
#15
iTrader: (8)
Join Date: Oct 2002
Location: Colorado USA
Posts: 6,730
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 330 i want o do this, send me a copy please
newbreed@rogers.com
What about milege, does it go back to zero?
newbreed@rogers.com
What about milege, does it go back to zero?
#24
Registered!!
Thread Starter
Join Date: Apr 2004
Location: houston tx
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 yes there is a difference between lx, ex, and dx the difference are that ex have one more wire for abs more than that of lx and dx. and ex and lx wiring is in a different order than that of dx. Also 01-02 is another different wiring than that of 03-04.
#27
Registered!!
Thread Starter
Join Date: Apr 2004
Location: houston tx
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 i do....and if u r in houston i would be happy to help u out.....i also have the diagrams\wire pinout if u need that.......but other than that its really simple.....any other questions that u might have jus PM me or something......
#28
Registered!!
iTrader: (4)
Join Date: Feb 2004
Location: Virginia Beach, VA
Age: 39
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by chocobo15_2000
i dun think there is difference btwen 03/04, so all 01/02 can swap to 03/04...i was just wondering if there is difference between dx/lx/ex?
direct swaps are the following:
01-02
03-03
04-04
#29
Registered!!
Thread Starter
Join Date: Apr 2004
Location: houston tx
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 03-04 is a direct swap and 04-03 is also a direct swap.........and dont BS wit me cause ive done it......03 and 04 is not a direct to a 01 and 02 though......the only thing i havent tried yet are the 01 and 02 into a 03-04 dx........but i think they will fit jus fine with no adjustments to the wiring because wen i looked on da back of the dx model cluster the wiring appears to be the same as the 01-02 clusters.....