Rep Power: 263

DIY like how to do change it? if u have the armrest/compartment there are four screws under the rubber mat, make sure u dont crack anything when pulling it apart

 
Rep Power: 0

So does anyone know where we can find these kits (or any kits for that matter) because i can't find them.

 
Rep Power: 269

Removing Center Console DIYs (conveniently located in the DIY section of the 7thgen section of the Forum):
https://www.civicforums.com/forums/1...r-console.html
https://www.civicforums.com/forums/1...e-removal.html

Once you get the console off, it's pretty self explanatory.

As far as Grey's kit, good luck. He may be hanging around Import Passions these days. I highly recommend Grey's kit, or make sure you bend the cotter pins in a way to avoid ripping a hole in your new boot.

And the aluminum bushings are much better than stock. The stock bushings are rubber with a metal sleeve. The rubber allows the entire boot to move, and the aluminum bushings eliminate 98.864% of that movement.

 
Rep Power: 0

Well i can't seem to find anything on gray's kits so if i were upgrading my stock shifter to a Revo ss should i just use the stock bushings or is there any other places that have/make kits to replace them?

 
Rep Power: 0

yeah it just kind of sat that way after i screwed it down the first time, i like it.

 
Rep Power: 0

wow that looks really good i knew i had good taste lol

 
Rep Power: 287

You know you can fix your problem right?? I had the same problem when I got the shift ****. You actually have to use a wrench to tighten the nut. If you tighten the nut by hand it sits on the angle you have it on.

 
Rep Power: 353

yea.....i want to know this as well.......but we're not getting the answers we want....haha im tempted to start another thread asking for just this

///////////edit

are these simular to GRAY's alum. bushings?

eBay: Aluminum Shifter Bushings RSX Civic Si EP3 EM2 DC5 TSX (item 260074686995 end time Jan-17-07 18:37:04 PST)

 
Rep Power: 269

To clarify:
Capyoda was a user who sold the aluminum bushings. I think he has a website somewhere and may still sell them. CorSport has them and they are $25.

Grey was also a user here who sold another kit. It was some rubber washers and pins to eliminate side movement and the cotter pins that will rip a hole in your shift boot if they are not bent correctly (spoken from experience). Grey hasn't been around in a while. Has anyone tried PMing him? I think I saw that he may be hanging out over at Import Passions but under a different name.

Neither kit is necessary, but both are improvements to the stock counterparts.

 
Rep Power: 420

Hey guys... I'm still selling them. If you would like one, then it's $7 shipped to the US and $8 shipped to Canada. You'll get 2 hitch pin clips (stainless), two neoprene-bonded washers (stainless), and two e-clips (spring steel). Instructions too! Basically, my kit fixes up the Revo's funkiness. After you install the Revo you'll get more slop (play) in the shifter assembly and you won't be that happy with it. Some people also get some rattle. My kit fixes this. If you would like one, then PayPal me at: mdobosz@gmail.com

thanks,
M

 
Rep Power: 261

hey this is off topic, but does anyone know what is the thread pitch and size of the screw for the adjustable part of the revo?

 
Rep Power: 0

Nice. Just sent an email to Grey about his kit, hopefully he's still selling them. Sorry, don't know the thread and pitch size of the adjuster.

 
Rep Power: 420

You did? I didn't get it. PM me and I'll send you my e-mail... The forum functions should work too though.

 
Rep Power: 0

PM received, sent back (3 times - sorry!) and funds sent via PayPal. Thanks Grey!

 
Rep Power: 0

Ordered the kit from Grey last week on Sunday, can't wait to finally put the Revo in!

 
Rep Power: 0

ultimate revival

 
Rep Power: 249

No kidding. I just saw a post from my old SN. Weirdddddd.

 
Rep Power: 351

Hey, good find, some ppl were just asking me if Mike was still selling his old 7th gen DIY kits. Good to know he's still hooking ppl up.

 
Rep Power: 0

haha whats your old sn unevolved?

edit: are you bob sagator?

 
Rep Power: 360

lol @ bob sagator.

 
Rep Power: 0

Grey are you out there? I haven't heard from you since I sent the money 2 weeks ago.

 
Rep Power: 272

looks like grey hasn't been actually been on the site in about a month. i was wondering myself if he was still doing them. you'll get your kit though...tons of us bought from him with no problems.