Pulley moved while changing harmonic balancer
#1
Registered!!
Thread Starter
Join Date: Nov 2015
Age: 28
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Pulley moved while changing harmonic balancer
Attempting to replace the harmonic balancer/crank pulley. While trying to loosen the bolt the crank socket tool popped out and the pulley moved slightly. from what I know this happening moves the valves, could they possibly be open in the cylinders now? Or would turning on the engine damage things. The pulley only moved maybe an inch but I dont want to risk anything.
Any help is appreciated. Thanks
Any help is appreciated. Thanks
#2
Registered!!
Join Date: Jul 2010
Location: Paradise Ca
Age: 41
Posts: 1,472
Likes: 0
Received 3 Likes
on
2 Posts
Rep Power: 183 Re: Pulley moved while changing harmonic balancer
If you never disconnected the timing belt, then you are fine.
If the belt was off then you have more work ahead of you. don't loose the small metal key that aligns the pulley when you remove/replace it.
If the belt was off then you have more work ahead of you. don't loose the small metal key that aligns the pulley when you remove/replace it.
#3
Registered!!
Thread Starter
Join Date: Nov 2015
Age: 28
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Pulley moved while changing harmonic balancer
Only belts that are off are power steering and AC/alt belts. Haven't opened up or touched the timing belt at all. So I'm all set, if I change this pulley and put the belts back on starting will be fine?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
35
10-31-2015 10:06 PM
damahark
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
10-28-2015 08:11 AM
98mxz500
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
10-22-2015 10:20 PM