Rep Power: 0

i have an 04 civic si sedan and i had a problem with my wipers for some time now.... i can turn it on high and use the mist thats it... no low or med... i canged the wiper switch already and didnt make a dif.... need help

 
Rep Power: 308

I you use high or mist will it park at low speed as it should ??

Do you have to park it manual ??

 
Rep Power: 0

i have to do it manualy

 
Rep Power: 308

Well.... The park uses the low speed windings to perform parking.

Is this a Canada made model by chance ?? (04 Si sedan)

Own a multimeter ??

 
Rep Power: 0

i dont own a multi meater and im not shure if its canadian... but my registration sais 04 si and its a 4 door auto... its the wifes car

 
Rep Power: 518

I think he meant are YOU in Canada?
An Si up there is an EX down here. (1.7 engine)


An 04 Si down here is a 3 door hatch and has a 2.0 engine.

 
Rep Power: 0

yea i live in canada... it has the 1.7 vtec... any ideas on the wipers

 
Rep Power: 308

This is a quote from the electrical manual on theory and some wire color info:



With the ignition switch on II battery voltage is applied to the wiper motor through fuse #20 (in the underdash fuse relay box) when you move the wiper switch to LOW, the low speed winding of the motor is grounded through the low contact of the wiper/washer switch, and the wipers run at low speed.

Wire colors: GRN/BLK = +12 volts ign at II
BLU = LOW
BLU/YEL = HIGH

With key at II measure voltage at the BLU lead to see if voltage present…If not you have open low winding or open circuit