Cheddar

Driver side brake light was out. Switched the bulbs between right and left now both don't work. The third central brake light is still active and works fine. Replaced bulbs for both right and left and they still don't work. Hazard lights come on, horn works and I checked the fuse anyways it isn't blown. I'm stumped since the Hazards and the horn works and the third brake light works. Any advice?

mac25

Buy a Haynes manual
-look through the electrical diagram and test the fuses and relays
as well as the voltage, amperage and resistance to each item, with a multimeter.

ezone

Bad bulbs and/or sockets?

CraigW

iTrader: (1)

This rules out a lot of stuff....

As mentioned inspect the sockets, and bulbs.

Cheddar

The hazards work and I replaced the bulbs so it shouldn't be either.

Cheddar

REplaced bulbs and hazards work so shouldn't be those

Cheddar

Checked the fuse for brake lights and its fine, I have a feeling that there is just a wire somewhere that is loose or damaged.

ezone

They use separate bulbs and sockets, completely unrelated..

Brake and tail lights share dual-filament bulbs.

CraigW

iTrader: (1)

Get a test light at auto parts store for $5 or less.