Rep Power: 0

1. Run a straight piece of metal along the length of the car with a bubble level in the center
   
2. Add spacers underneath passenger side tire until the bubble level showed level
   
3. Put a bubble level along the wheel to check camber
   
   Driver side (I was in a wreck)
   
   Passenger side (I was in a wreck)

I only added spacers to the passenger side since my driveway is slanting down that direction. I did not check if the rear tires were level, and did not add any spacers to the back tires. IS THIS A PROBLEM? I didn't think I needed to level the rear tires since I'm only checking camber on the front tires, am I wrong?

Did I do this correctly?