Rep Power: 0

I have a '01 Sedan and would like to know if the Neuspeed Front Upper Strut Bar will fit without modifications ? I have searched the forum and it seems there's only talk about bending the Clutch reservoir bracket a little. It seems that on the JDM versions of the sedans(which is mine), there's a vacuum pipe going behind the stock air filter box which leads from the intake manifold to the brake booster pump. The Neuspeed Bar will be squashing this pipe as it crosses(left strut tower to right strut tower) near to the firewall. Anyone with this problem ? How did you go about fixing this ? Thanks.

 
Rep Power: 412

why would it be any different? It should fit. Just wiggle the clutch res. and you should be fine.

 
Rep Power: 0

damn, i've been looking at that clutch rev....and im wondering...and wondering....how in the hell to move that bottle..

anyway, i saw many pics in the member's ride....it's strange...on some pics, it's gone....some are twisted or bent, etc....but some are completely gone..

where are they?

 
Rep Power: 304

depends on your year. the instructions said for 2001's you have to move it. and for 2002's and up you simply have to bend it forward. choose your year.

 
Rep Power: 351

you can move it down to the next hole. or just bend it fwd. i have it on my sedan no problems what so ever.

 
Rep Power: 0

I have a 2001 Coupe and all i needed to do was bend the bracket. Easy install.

 
Rep Power: 403

well on some cars there is none, because the are automatics...lol

 
Rep Power: 0

I will get the pics in when I take them to explain which hose and pipe I was referring to. Thanks.

 
Rep Power: 0

I moved mine to the next hole down. Took 2 minutes.

 
Rep Power: 0

fawk, i forgot...some are auto..

can you take a pic of that "next hole" ? im confused....

 
Rep Power: 338

The next hole is right below the current hole holding the clutch res. I actually had a slight problem but it was taken care of by sheer force.

 
Rep Power: 0

there is no such hole in my car....it's used by another tube.....big tubee...

 
Rep Power: 332

same here.
Well it took me 10 min cause I lost the damn screw.

 
Rep Power: 0

mannn

any close up pic of that hole that ur talking about? maybe a pic of the new location for the clutch bottle?

 
Rep Power: 0

Okay here are the pictures. Notice the pipe running parallel to the firewall. This is the pipe I was referring too which migh interfere with the Neuspeed Strut Bar. Anyone fitted it with this pipe ?