Rep Power: 0

I need help figuring out the wiring. Im doing a k20 swap and i have all the rsx ecu wiring diagrams and the civic ecu diagrams. However, there is one of the rsx connectors that comes from the engine bay along with the A & B connectors. It is the rsx body C101 connector and it is grey with 20 pins and it hooks up to the civics body harness connector(also has 20 pins). The problem is that these wires are a little mixed and need to be matched, and i cannot find the wiring diagram for this connector for the civic in order to match it up with the rsx's. If you can help me i will appreciate it very much. Better yet if someone has the hasport harness and can tell me exactly what was done on it, it'd be great. If so, PM me and we'll work something out. $$

Thanks

dfcivic

 
Rep Power: 0

rather then tryin to do all that wiring y not buy the hasport wiring harness conversion

 
Rep Power: 0

im thinkin of doing that, but its really only one clip on the harness that has to have the pins rearranged. So unless im stuck, ill hold off on the hasport harness.