Dezod Motorsports Turbo Kit! Now Shipping!! VIDS ON 979 & Pics, DYNO on POST 1330
Thread Starter
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0 
Originally Posted by taz757
What EBC didja get? Apex'i?
I was tossed up between HKS EVC or GReddy Profec B
I went with GReddy for now.
Chicks dig my scent
Joined: May 2003
Posts: 1,185
Likes: 0
From: Hickville, NC
Rep Power: 0 The Profec B is awesome. Good luck with running it. And good luck with the race, i was real close with a 96 mustang cobra (exhaust, chip) up until 5th gear and he pulled a car length on me...good luck anyway
New Member
Joined: Aug 2003
Posts: 892
Likes: 0
From: Louisiana
Rep Power: 0
Originally Posted by MadWheel
Honestly I think it's because I'm a wuss. I only had time for 2 runs last night before they closed the lanes. I rarely turn the boost up high enough. I ran a 14.705 at 95.67mph at only 6.5 psi haha... And my 60' foot was pretty rough, 2.35, I had a tiny bit of hop so I let off a little.
In case anyone's wondering, I'm mild on the boost because it's my daily driver and can't afford to break this engine. Once I get a beater I'll start really pushing it.
In case anyone's wondering, I'm mild on the boost because it's my daily driver and can't afford to break this engine. Once I get a beater I'll start really pushing it.
I know u've parted out some of your kit...with what mods did you run this time on?
damn so a SC Cobra ran a 14.0
those are supposed to be high 12 sec cars
Joined: Sep 2002
Posts: 3,857
Likes: 0
From: Arizona
Rep Power: 327 i got rid of the ntercooler kit and ditched the alcy injection. i just tried to make the pipes flow as efficently as possible.
Track was crazy slippery though, so it was kind of hard for both of us.
Track was crazy slippery though, so it was kind of hard for both of us.
Thread Starter
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by HyaBoosta
why would you get rid of the ntercooler and alchy? especially the alchy.
Thread Starter
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by HyaBoosta
but why not use the dezod kit with the alchy and ntercooler?
We also don't want baised testing based upon these variables.
Joined: Sep 2002
Posts: 3,857
Likes: 0
From: Arizona
Rep Power: 327 Exactly. I didn't use the nitrous enough anyway to miss it... only a couple times. Also, the alcohol system is a joke to me... Has anyone actually taked the jet off then blasted water or something through it to see how it atomizes? It doesn't!!! It squirts a solid stream of water like a small hose or a squirt gun. Now I don't want that kind of fluid just dripping into my engine. If I'm doing alcohol injection, it will be properly atomized and tuned so I can run it safely.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
Thread Starter
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by MadWheel
Exactly. I didn't use the nitrous enough anyway to miss it... only a couple times. Also, the alcohol system is a joke to me... Has anyone actually taked the jet off then blasted water or something through it to see how it atomizes? It doesn't!!! It squirts a solid stream of water like a small hose or a squirt gun. Now I don't want that kind of fluid just dripping into my engine. If I'm doing alcohol injection, it will be properly atomized and tuned so I can run it safely.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
Retired - SoCal FI Mod
iTrader: (4)
Joined: Jan 2002
Posts: 3,139
Likes: 0
From: Boston, MA
Rep Power: 0
Originally Posted by MadWheel
Exactly. I didn't use the nitrous enough anyway to miss it... only a couple times. Also, the alcohol system is a joke to me... Has anyone actually taked the jet off then blasted water or something through it to see how it atomizes? It doesn't!!! It squirts a solid stream of water like a small hose or a squirt gun. Now I don't want that kind of fluid just dripping into my engine. If I'm doing alcohol injection, it will be properly atomized and tuned so I can run it safely.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
Thread Starter
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by ofourcivic
Any recent updates on the kit?
Thread Starter
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by ZdS03Civic
The video was like 15 seconds long..and it shows no numbers
I have each graph on seperate pieces of paper. The TQ graph was the only impressive number IMO. The problems with the EBC began around 4000-4500 RPMS, which means the whole graph from there on, was teh suxorz. The graph started off nice, then just DIED. Quite depressing actually.
Originally Posted by ZdS03Civic
The video was like 15 seconds long..and it shows no numbers
dont worry.. next time they do a run and take video... dezod can use my server again... (perhaps our minds will be blown away with the next)
Thread Starter
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by NeonImpact
if not, i could always host a vid for ya paul.
btw, get that adapter yet?
ill have to get you the confirm. # as well
btw, get that adapter yet?
ill have to get you the confirm. # as well
Originally Posted by MadWheel
Exactly. I didn't use the nitrous enough anyway to miss it... only a couple times. Also, the alcohol system is a joke to me... Has anyone actually taked the jet off then blasted water or something through it to see how it atomizes? It doesn't!!! It squirts a solid stream of water like a small hose or a squirt gun. Now I don't want that kind of fluid just dripping into my engine. If I'm doing alcohol injection, it will be properly atomized and tuned so I can run it safely.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
We will test the dezod kit on my 5 speed first as a base kit, and from there see how it responds to mods, that's about it.
Im in Posession of that Ntercooler Kit now
