Rep Power: 258

Well, my sub completely destroyed my trunk. The carpet has completely been ripped out and all the the screw things are bent to ****. But now without the carpet there, it slides around a lot easier on the wood. I already put a piece of wood in the front, so now it slides left to right in the back half of the truck, and jumps around on every bump I hit, any idea on how to keep it in place?

 
Rep Power: 0

bolt it down using L-brackets

 
Rep Power: 0

no no no, better than l-brackets... go to a junk yard and get the hood latches from a jeep, i prefer a nice cj-7 hood latch myself. attach "loop" section to sub (or in my case, tool box) and "hook" section to trunk floor. makes for an awesome DIY and, in my case, you can remove your toolbox quickly and easily. yes yes, you may rep me for that one:-D

 
Rep Power: 260

cheapest easiest and most practial way to do it is to go to home depot and get some industrial strength velcro to stick it down.. and then you can take it out easily if you need to also

 
Rep Power: 0

or or or, get a small asian child to live in your trunk and hold it... that's the JDM way

 
Rep Power: 260

!! ^ +1 for that

 
Rep Power: 0

another +1 rep

 
Rep Power: 277

You must do some mad e-braking, yo.

Anyway, just get a flat piece of rubber, maybe a cut up winter mat or something, and put it under your sub box. It won't slide then.

 
Rep Power: 272

lol whatever you do asian child or L brackets have it bolted down. If your system is stolen most insurance companies wont cover it if it wasnt bolted down.

 
Rep Power: 253

I've got the small asian child... I tried to bolt his feet to the chassis but I just can't quite get him to stop squirming enough to hammer his feet down.


.....



....


Wait... Did you mean Bolt down the sub?

 
Rep Power: 0

ite dude, i had the same problem. i used a pretty cheap fix, but it works amazingly. idk about yours, but my cardbord plate that goes over the spare tire was bowed in pretty bad. anyway, i cut two 1x4s and just used very small screws and screwed them to the bottom of my box running parrallel on each side front/back. it works really well man, no more sliding and more importantly nothing is being damaged! hope this helps, ill upload pix soon

 
Rep Power: 314

Im getto.

I use my stock jack & just sorta pry it in between the top of my trunk & the box.

 
Rep Power: 277

just stop caring about it and you wont notice it anymore.. thats what i did. i had the same situation too with the screws being bent and the carpet notthere just glue the carpet onto the cardboard.

 
Rep Power: 0

yes sir, thats how i have minee

 
Rep Power: 314

HAHAHAHA! Your new Avatar is the **** DJ!^^^

 
Rep Power: 0

If you get some decent subs and box with some weight on the magnets you wouldn't have to worry about it movin around. Mine is heavy i can barely get it in and out.

 
Rep Power: 244

if you got some good stuff just give em to me =] that'll help it from moving around your trunk.. i dont mind them moving around in my trunk at all =] if you got some weak $hit then just throw them away if it bothers you that much

 
Rep Power: 302

make an L bracket and screw it to the floor.

 
Rep Power: 256

i had the same exact problem when i first got my em2. the carpet got ripped around those holes and all the studs got bent. since then ive been made crazy about weight reduction and i removed everything from the truck and the backseat, built a new box and fabbed some aluminum brackets that bolt to the floor where the backseat used to be. i had some cheapo l-brackets back in the day. they came out after a launch in a race ripped the screws right out of the box and the box went flying to the back of the truck. my amp was mounted on my box so all my wires got ripped out. the rca jacks on my signal converter got wrecked. was a fun experience.

 
Rep Power: 258

u have any pics of the new setup?

 
Rep Power: 256

i sure dont. ill get some pics and post.

 
Rep Power: 361

Im all about L brackets and some screws.

 
Rep Power: 256

i was until my experience. it was with an off the shelf box anyway. i didnt think l-backets would cut it with the dope *** box i built.

 
Rep Power: 253

One of these days I'm going to re-lay my trunk. Right now I've just got the stock crappy cardboard. I want a nice MDF floor though.

 
Rep Power: 256

thats too much weight

 
Rep Power: 341

Use pamela andersons old implants and put one on each side of the sub box. This might cause a dramatic increase in weight but at least the sub will stay put..
I think she has them for sale on e-bay lolllll