Rep Power: 297

Do you need the rsx seatbelt latches that go on the side or can I use the ones from my civic? And do I need to rewire the bottom two plugs?
thanks

 
Rep Power: 412

Seatbelts? Who needs seatbelts? haha

jk, I haven't heard of any such problems because you just bolt your stock latch to the rsx seat. That way you use the same plug.

 
Rep Power: 319

yep...dont have em but i installed them in my friends civic 7thgen

 
Rep Power: 360

i used the RSX seat belt things built into the seats on the RSX seats.
even the wires are plug and play

 
Rep Power: 331

mine didnt come with latches, so i used my stock ones.

 
Rep Power: 306

^^ yea when i installed my friends, he had to use his civic ones... but when i installed mine, the guy gave me them with the seats.

either one will work just fine.

 
Rep Power: 0

which RSX seats are you going to use? is that the Recaro or just the normal RSX seats ? because I just bought a set of normal RSX seats and it already has the seatbelt latches...and as far as I know if you bought the Recaro which originally installed from RSX, they have the latches as well...but if they're not there, you still can use the one from your civic.

 
Rep Power: 297

i have the leather rsx seats? are those recaro?

 
Rep Power: 331

no, the recaros are slightly different and i think they are covered in blue suede w/the recaro logo stiched on.

 
Rep Power: 261

While were on the topic, do you guys think the leathers off a 99 integra gs-r would fit into our cars? (Coupe btw) I was also curious about how the fitment for the back seat is

 
Rep Power: 331

i highly doubt they would fit without tons of modification.

 
Rep Power: 297

yea, the guy is including the clips so...

 
Rep Power: 0

silverem2 : those are made by recaro as well but its not for race spec. I had the one like yours. Just have to make new rail to fit the civic if you want to keep your original seat in whole original condition. I had no problem with that seat....but now the seat has been released because I'm going to re-trim the seat.

 
Rep Power: 434

the seats fit perfectly fine. you will only get 3 out of the 4 holes lined up correctly to bolt down, but with a little dremel working you can get all 4 holes bolted.

as far as the seat belts and the wiring...i thought that the buckles were built in to the seat bracket and the wiring should still be there

 
Rep Power: 297

Yea, The only thing im concerned about now is if I have to mod and splice wires for the seat connectors...anyone know?

 
Rep Power: 0

No they should bolt right up. Did your seats already have side airbags? If not I have a the adaptor for sale. Mine already had the plugs for the side aiirbags.

 
Rep Power: 0

i had Dodge Neon SRT-4 upgraded ( with leather sides ) in my for a week...

the front bolted up but the backed didnt ... just gotta modify the back bolts to fit but the seats got crap loads of big ups... i didnt like em becuz they say EXTREMELY low vs the stockers..

but on the seat click thing i used em off my stock seats on the srt-4 neon seats and a 2 and 1/2 bolt form home depot and that was it ...

 
Rep Power: 0

seats bolt into 3/4 holes like mentioned (only one with no bolt is right back near center console)...eveything is plug and play!!!!

 
Rep Power: 331

i got all 4 holes to line up, if you use a step bit, you can enlarge all the holes and just maneuver the seat around until you can get all the bolts in.

 
Rep Power: 293

does anyone have a diy for the install? Are the rear seats just bolt on also??

 
Rep Power: 0

NO, I found that out the hard way. lol the bottoms clip right in, but the backs need to be modified. One of the two splits needs to have the leather taken off and 6 inches cut away from the inside. (metal and all)

 
Rep Power: 296

is this the thread for PEOPLE with rsx seats versus the thread for ANIMALS with rsx seats? just wondering