Increased resistance in left side seat belt tensioner
Thread Starter
Registered!!
Joined: Feb 2012
Posts: 35
Likes: 0
From: Nova Scotia, Canada.
Rep Power: 0 
Increased resistance in left side seat belt tensioner
Hey, I swapped in a set of RSX leather seats into my 05 sedan. All's well except my airbag light is now on. Hooked up a code reader and it's giving me the code Increased resistance in left side seat belt tensioner. Cleared it and it came back right away.
The car they were in before mine didn't have an airbag light. Any advice? Thanks
The car they were in before mine didn't have an airbag light. Any advice? Thanks
The legs in the public bathroom stall
Joined: Mar 2015
Posts: 382
Likes: 6
From: MURICA
Rep Power: 141 










Re: Increased resistance in left side seat belt tensioner
Did you plug it in? Has the tensioner been deployed?
Sometimes this code is set be a very very small amount of corrosion on the terminals in the connector. Other times it can be a pin-fit issues which is when the female terminal is spread out and not griping the pin properly.
The service info will tell you to not measure the resistance of tensioners and inflator due to the risk of accidental deployment.
Sometimes this code is set be a very very small amount of corrosion on the terminals in the connector. Other times it can be a pin-fit issues which is when the female terminal is spread out and not griping the pin properly.
The service info will tell you to not measure the resistance of tensioners and inflator due to the risk of accidental deployment.
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 










Re: Increased resistance in left side seat belt tensioner
What is the actual code number?
HINT: "Belt" is not the same as "buckle". Think about it.
HINT: "Belt" is not the same as "buckle". Think about it.
Thread Starter
Registered!!
Joined: Feb 2012
Posts: 35
Likes: 0
From: Nova Scotia, Canada.
Rep Power: 0 
Re: Increased resistance in left side seat belt tensioner
Did you plug it in? Has the tensioner been deployed?
Sometimes this code is set be a very very small amount of corrosion on the terminals in the connector. Other times it can be a pin-fit issues which is when the female terminal is spread out and not griping the pin properly.
The service info will tell you to not measure the resistance of tensioners and inflator due to the risk of accidental deployment.
Sometimes this code is set be a very very small amount of corrosion on the terminals in the connector. Other times it can be a pin-fit issues which is when the female terminal is spread out and not griping the pin properly.
The service info will tell you to not measure the resistance of tensioners and inflator due to the risk of accidental deployment.
Is it possible to use the buckle assembly off of my stock seats with the rsx seats? Thanks
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 










Re: Increased resistance in left side seat belt tensioner
Read this again:
HINT: "Belt" is not the same as "buckle". Think about it.
Is it possible to use the buckle assembly off of my stock seats with the rsx seats?
It's not a buckle problem.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
EdGasket
6th Generation Civic 1996 - 2000
4
May 25, 2015 01:06 PM
jimmyfloyd
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
May 20, 2015 07:06 PM



