coilover Owners
Thread Starter
Registered!!
iTrader: (3)
Joined: Jun 2004
Posts: 244
Likes: 0
From: Fort Belvoir,Va
Rep Power: 0 
coilover Owners
I own ground control sleeved coilovers. Does anyone else own Ground Control coilovers. Does anyone know within that set which springs go in the front and which go in the rear.? Same for the sleeves in that set.? This will be my third try(attempt) at the install, and my last option now is to place the smaller springs on the longer sleeves in the front and the larger springs on the shorter sleeves in the rear. Any help 
would be appreciated
would be appreciated 
Autocross Junky
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Oct 2002
Posts: 7,211
Likes: 0
From: Las Vegas, Nevada, US
Rep Power: 380 
Have you considered contacting Ground Control and asking them??
Straight from their site
Straight from their site
Please contact us with feedback or questions about our products.
Telephone: 1-530-677-8600
Telephone: 1-530-677-8600
Thread Starter
Registered!!
iTrader: (3)
Joined: Jun 2004
Posts: 244
Likes: 0
From: Fort Belvoir,Va
Rep Power: 0 Dude,
That is the set up I used on my second attempt. And I'm thinking, keep the longer sleeves in the front and the shorter sleeves in the rear. AS you said. And, maybe put the shorter springs in the front and the longer ones in the rear. Being that the larger ones will have less of a spring rate and vice versa. Any thoughts? This really has me stumped and is costing lots of time and money. Thanks Dudes.
That is the set up I used on my second attempt. And I'm thinking, keep the longer sleeves in the front and the shorter sleeves in the rear. AS you said. And, maybe put the shorter springs in the front and the longer ones in the rear. Being that the larger ones will have less of a spring rate and vice versa. Any thoughts? This really has me stumped and is costing lots of time and money. Thanks Dudes.
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 2,317
Likes: 0
From: PG county, MD, Maryland, US
Rep Power: 0
Originally Posted by wannabe
Dude,
That is the set up I used on my second attempt. And I'm thinking, keep the longer sleeves in the front and the shorter sleeves in the rear. AS you said. And, maybe put the shorter springs in the front and the longer ones in the rear. Being that the larger ones will have less of a spring rate and vice versa. Any thoughts? This really has me stumped and is costing lots of time and money. Thanks Dudes.
That is the set up I used on my second attempt. And I'm thinking, keep the longer sleeves in the front and the shorter sleeves in the rear. AS you said. And, maybe put the shorter springs in the front and the longer ones in the rear. Being that the larger ones will have less of a spring rate and vice versa. Any thoughts? This really has me stumped and is costing lots of time and money. Thanks Dudes.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
brags
General Automotive Discussion
9
Oct 2, 2015 05:53 AM
Hutch1051
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
Sep 29, 2015 09:20 AM
