Rep Power: 295

Alright guys, i put on my neuspeed sport springs 2 days ago and my car did not lower properly on one side. The passenger rear side has about a half finger gap while the rear driver side has a healthy one finger gap. Anyone have any ideas about this problem? Ive heard i should wait for them to settle but at that rate they would still be uneven. Any help from anyone with this problem would help. Ive searched and everything but could not find anything. Thanks

 
Rep Power: 417

what size tires? try giving it a few more days although it might already have fully settled.

 
Rep Power: 295

I got 215/45/17.... yea its been a few days and i really can't notice it now but when i first lowered it it was real bad difference. Now im gonna have to get the rear camber adjusted and it looks like it could scrub so i dunno.

 
Rep Power: 417

ya should definitely get a rear camber kit. i dont have one and can tell the camber is pretty off.

 
Rep Power: 0

I have a different problem with mine. I installed them like 3 weeks ago and i still notice that the rear passenger side has a gap of 3 fingers and the rear driver side has a gap of 2 fingers, but tight. My front is perfect with a gap of a finger and half on both sides. Could it be because of the replacement of the rear driver side strut??? I had it replaced by the dealer because it blew. Should I have passengers in my daily driving to help my springs settle??? I usually drive alone.

 
Rep Power: 0

I also have a camber kit and its already aligned. I installed it the same day I installed the springs. I guess that was my mistake.

But I guess in your case could be camber on your rear.

 
Rep Power: 0

NeonImpact,

I hope your right man cuz i am starting to get worried.

And your saying that it will get lower around after 2 months???

 
Rep Power: 0

Looks like I got everything except 205/40/17, Goldlines, and Time and Patience.

I got 215/35/18 and Neuspeed Sport.

Oh and thanks for your opinion and looks like i need to wait a week and one more month for springs to fully settle. Must be patient I know.

Late

 
Rep Power: 295

man those 215/35/18s gotta be close to rubbin cuz my 215/45/17 are bout a centimeter away from rubbing

 
Rep Power: 417

actually 215-45-17s are bigger in diameter than 215-35-18s so you have a better chance of rubbing.
i have 215-40-18s and dont rub. but then i dont have a camber kit so..