4 to 5 adapters
Thread Starter
Registered!!
Joined: Jan 2019
Posts: 25
Likes: 0
Rep Power: 0 
4 to 5 adapters
Have a set of Audi 2001 wheels bought from tire rack 17" very light.where for my winter tires but not needed now,thinking on using a stud adapter 4 lug Honda to 5 lug Audi rims.anybody know of wheel adapters? Are they safe,pros cons?
Dr Krieger of Modification
Joined: Jul 2010
Posts: 3,407
Likes: 84
From: canada
Rep Power: 228 
Re: 4 to 5 adapters
I've been running 2" adaptors for a few years, I had them fabricated at a place that makes truck wheel adaptors. But mine are 4 bolt to 4.
mine use two sets of lug nuts. One for adaptor to rotor, the other for wheel to adaptor. So far they have always stayed tight, after 3-6month checks. (Not sure if 4 to 5 lug is possible with the limited spacing, to run proper dual lug adaptors)
....
Cons, not legal for public roads in some areas.
mine use two sets of lug nuts. One for adaptor to rotor, the other for wheel to adaptor. So far they have always stayed tight, after 3-6month checks. (Not sure if 4 to 5 lug is possible with the limited spacing, to run proper dual lug adaptors)
....
Cons, not legal for public roads in some areas.
Joined: Dec 2008
Posts: 15,175
Likes: 1,605
From: TN
Rep Power: 366 Re: 4 to 5 adapters
the adapter will push the wheel outwards, so you will need to check if it will actually fit on the civic.
7th gen civic are 38mm off-set?
tighten well the adapters - you will not be able to see if they are loosening since wheel will be on top.
7th gen civic are 38mm off-set?
tighten well the adapters - you will not be able to see if they are loosening since wheel will be on top.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
jringo8769
7th Generation Civic 2001 - 2005
2
Jul 24, 2013 07:22 PM
streetglower
Fuel, Oil, Cleaners & Other Maintenance
39
Apr 25, 2006 11:10 AM
