REV Limit Issue
#1
Registered!!
Thread Starter
Join Date: Apr 2014
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 REV Limit Issue
For about a week now my car wont allow itself to rev over 3500 RPM'S.. Its like it has a Rev Limiter in it. I have changed plugs thinking it was just a foul plug with no success. It has actually turned completely off while driving about 55 shortly after the Rev issue. Not really sure what my next step should be. Any help would be appreciated.
Thanks
Also, This is a 2003 Civic LX
Thanks
Also, This is a 2003 Civic LX
Last edited by cburris; 04-16-2014 at 07:10 AM.
#3
Registered!!
Thread Starter
Join Date: Apr 2014
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: REV Limit Issue
No CEL and Oil Level is good. It is a 5 speed. I do have a Malfunction indicator lamp on, but has been off and on for about a year. I think that is an emissions issue.
Thanks for the quick response.
Thanks for the quick response.
Last edited by cburris; 04-16-2014 at 08:52 AM.
#5
Registered!!
Thread Starter
Join Date: Apr 2014
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: REV Limit Issue
#6
If you think a good mechanic is expensive, try hiring a bad one
#8
Registered!!
Thread Starter
Join Date: Apr 2014
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: REV Limit Issue
It pulled a "Cam Shaft Position Correlation" Code. Im pretty sure thats what he said. I was driving and didn't have a chance to write the actualy code down. Any idea on that?
#11
If you think a good mechanic is expensive, try hiring a bad one
Re: REV Limit Issue
What was the actual code?
P0016 isn't possible from that PCM.
I'm thinking it would be more like P0335, P0336, P0340, or P0344.
P0016 isn't possible from that PCM.
I'm thinking it would be more like P0335, P0336, P0340, or P0344.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Wraithen
8th & 9th Generation Civic 2006 - 2015
11
06-07-2015 01:48 PM