Rep Power: 0

I installed my guages just fine and no problems. Now sometimes the gauges reset to the green setting even if I left it on the blue one. There are times when I turn them on the gauges don't turn on at all so I have to do the "turn off, turn on" game then they'll work. Even sometimes when I turn them on it'll just go through all the colors and brightness (which would be cool if my car was a strobe light). Is the wiring the problem or what? I spliced the positive to the left plug red wire w/black strip and the negative to the metal behind the gauge cluster. Please let me know if there's something wrong or if someone else has this problem.

 
Rep Power: 0

Blitz: So you have the 6 or 7 color guages... I think this is your problem...

The controller that controls your Transformer is bad... sounds like the buttons are all flucked up. Perhaps it is also your transformer unit... The controller inside of there which talks to your buttons may not be controlling the Transformer or Transistor inside correctly. You will probably need a new transformer (not cheap, hard to find) or just purchase a new set of guages w/ transformer and re-use your old guage faces while using the new transformer.