Kristoliquid

Hi i was trying to get my window down with the front and rear switch and it doesnt.

When i pull the switch up and put my ear against the door, I hear a click noise, but nothing happens.

What could it be? thanks )

GolNat

iTrader: (7)

Remove door panel and check the window motor. You can run power to it and check to see if it runs.

Kristoliquid

How can I run power through it? Thx

Kristoliquid

Should invest in a variable DC output power supply to test some **** out?

Colin42

Have any cordless tools? Could use the battery from that, or even a 9 volt will probably make the motor try

Kristoliquid

I've used a power tool battery to make the window go up and down. I guess the motor works.

What could be the next step.

Thx in advance!

Colin42

Check the switch for continuity could also test the motor connector for power and ground the switch is operated

Kristoliquid

I bought a test light and tried some **** out. I got one wire in the front switch and one wire in the rear switch when I press up and down, the light turns on in both ways. Is that a clue? And no it's not the red always hot wire when it's on (II)... I kind of made sense of a legit wire diagram.
Thx.

NDNV

Broken wires in the rubber door conduit in the driver's side front or rear. Mine were broken in the driver's front and affected the passenger's rear which would open but not close.