Emanage Full DIY Install-NEW UPDATE 9/30/05
#91
Registered!!
Join Date: Nov 2005
Age: 38
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Any of you have a VTEC head swap and using the e-manage to set vtec?
I have an e-manage installed in my car some time ago (D17A1). I did the VTEC head swap but can't activate the vtec solenoid. I try with different settings on the jumpers and swithches. But it doesn't work.
I just have the "VTEC out" (blue wire) connceted to solenoid. The "VTEC in" (yellow) and "VTM" (purple) are disconnected. I test the vtec with a switch and it works perfectly.
Settings that I tried:
--#1--, I have this before the vtec, I try it with the vtec. No vtec.
4-8-D
JP1 1-2
JP2 1-2
JP3 1-2
JP4 open
JP5 open
JP6 open
JP7 1-2
--#2--,
4-8-D
JP1 1-2
JP2 1-2
JP3 2-3
JP4 1-2
JP5 open
JP6 open
JP7 open
--#3--
4-8-E
JP1 1-2
JP2 1-2
JP3 1-2
JP4 open
JP5 open
JP6 open
JP7 1-2
--#4--
4-8-E
JP1 1-2
JP2 1-2
JP3 2-3
JP4 1-2
JP5 open
JP6 open
JP7 open
P.S.
I search but can't found...
I have an e-manage installed in my car some time ago (D17A1). I did the VTEC head swap but can't activate the vtec solenoid. I try with different settings on the jumpers and swithches. But it doesn't work.
I just have the "VTEC out" (blue wire) connceted to solenoid. The "VTEC in" (yellow) and "VTM" (purple) are disconnected. I test the vtec with a switch and it works perfectly.
Settings that I tried:
--#1--, I have this before the vtec, I try it with the vtec. No vtec.
4-8-D
JP1 1-2
JP2 1-2
JP3 1-2
JP4 open
JP5 open
JP6 open
JP7 1-2
--#2--,
4-8-D
JP1 1-2
JP2 1-2
JP3 2-3
JP4 1-2
JP5 open
JP6 open
JP7 open
--#3--
4-8-E
JP1 1-2
JP2 1-2
JP3 1-2
JP4 open
JP5 open
JP6 open
JP7 1-2
--#4--
4-8-E
JP1 1-2
JP2 1-2
JP3 2-3
JP4 1-2
JP5 open
JP6 open
JP7 open
P.S.
I search but can't found...
#92
Registered!!
Join Date: Nov 2005
Age: 38
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Can you or someone solve this problem? I have the same situation now, swap the heads and have to engage the vtec with the e-manage (in a lx)...
#93
#94
Re: Emanage Full DIY Install-NEW UPDATE 9/30/05
GUSY PROBLEM BIG PROBLEM
i wired the ingnition and injection and now its not even starting, it starts and gives a nasty cranking noise and dies HELP ASAP im double checking my wiring
Ok guys nvm i fixed the problem
No spleeny, i think it has to be tuned for it to idle correctly. If you have the support tool you and fiddle around with it a little to make it idle correctly
i wired the ingnition and injection and now its not even starting, it starts and gives a nasty cranking noise and dies HELP ASAP im double checking my wiring
Ok guys nvm i fixed the problem
No spleeny, i think it has to be tuned for it to idle correctly. If you have the support tool you and fiddle around with it a little to make it idle correctly
#95
Registered!!
Join Date: Jul 2009
Location: Petersburg VA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Emanage Full DIY Install-NEW UPDATE 9/30/05
I know im reviving this thread from the DEAD! But i just got a couple questions.... I would like to know what Rotary settings i should use on a 2001 Civic HX d17...... I am gonna leave my Vtec completely seperate from my Emanage, but i dont wanna pitch any codes... soo if anyone knows... PLEASE hit me up!!
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Touge
Ottawa
0
07-18-2015 05:38 PM
Touge
Canada East
0
07-18-2015 05:37 PM
Touge
Canada East
0
07-18-2015 05:37 PM
Touge
Ottawa
0
07-18-2015 05:35 PM
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
8
07-12-2015 11:54 AM