Rep Power: 341

wish i could afford new seats

 
Rep Power: 0

I really don't know if I can...but my back hurts when I sit in the seats...They really suck!!!...

oh...and my windshield is cracked!!!!!!!!!!!!!!!! S.O.B. I'm sooo pissed....Now I gotta get that fixed...Hopefully I can just get the crack sealed and fixed rather than replace the whole thing...

Daaaammmmit!!!

 
Rep Power: 0

I love my seats [IMG]i/expressions/face-icon-small-tongue.gif[/IMG] I was so used to driving my Sonoma and my back would start hurting after 5 minutes of driving. Now I am in heaven with my Civic seats. LOL I will keep my eye open for seats.

 
Rep Power: 341

yea i was used to the seat in my 98 Nissan Pathfinder.. had lumbar support, but the seats were soo hard! i have a bad back from playin football n hockey, so it was horrible.. but the civic seats are nice n soft. my back likes it but my back would fall in love with the sparco reclinable seats

 
Rep Power: 0

a lot of people are going with sparcos. you can get a set for around $1k. might have to get new rails. the milano and torino both are reclinable. we can also get momo seats too. were going to carry the tenzos because they were cheap, but engineering is also cheap. we're also trying to get recaros.

as for my car, all i have now is intake, drop, and camber kit. my 17" velox should be coming in by the end of next month and the tsunami t2001 front bumper is waiting to be painted. other than that, im saving for the k20 swap.

 
Rep Power: 0

Daaaaaaaaam...well...seats might be beyond my budget...!!! oh well...

I can't really decide what to do now...Hmm?[IMG]i/expressions/face-icon-small-confused.gif[/IMG]...have to figure it out tho...its gettin nice soon...yea!

Gotta run...Interview and a meeting for 2 possible internships...I'll catch u guys lata...
Mark

 
Rep Power: 0

Good luck with the interviews!

 
Rep Power: 0

I now have one intern...for a gov't TV station up here at school...it's only Monday,tues,and wednesday this ummer...so barrin that I don't get anything else...still lots of time for me to work on the car and come home to cruise with u guys...

Another one I might be gettin, is with the democratic party...I'd be working in their video production department...Would be rather sweet...I'll keep u guys posted...Lata yo'z

Mark

 
Rep Power: 341

dang, your doing the k20 swap? lucky... geez, i just read threads about ppl getting this n that. i want this n that! but being 16, with part time job, it sucks..

good luck with the interview!

 
Rep Power: 0

Hey whats up! yeah i think they need to put us on the hot list this forum is pretty active.as for my rims platnum how much are you talking about give my a price and ill let you know i think $400.00 is a good buy i only had them on my car from July to sept (3 months) there are two little chips on one wheel nothing major no scratches when i had them on my car i wiped down my rims just about everyday. i have a guy at work that is intrested in the rims but he drives a VW passat i dont know if the bolt patterns match the rims are universal 4 lug

 
Rep Power: 0

Sup guys...All I gotta say is I hate Statistics class!!! ugh!!!... Not much else going on here...Got my job which is great...waiting on 2nd one...we'll have to see...Stylin, I was hopin for maybe like 375...but I understand that if the guy offers u more at work...No biggie!!!...So far the best I could find for tires was around 350...And I'm still concerned about just shellin out over 700 just like that...!

I really need some rims tho...And this is a good deal ur offering...Well...back to the studying game...Lata yo'z...Keeping my fingers crossed that it might really get warm soon!!! [IMG]i/expressions/face-icon-small-disgusted.gif[/IMG]

 
Rep Power: 341

weather.com lied! it was supposed to be cloudy today.. not rainy but im ganna paint my fuse box top and battery tie down anyways.. i just put on my 2nd coat of primer on both.. wait about 5 more mins, then time for 1st coat of red i want to do the bottom of the fusebox, but how would you do it with all those fuses in there? and the bunch of wires thats connected at the bottom of it, how do i disconnect that?


Edit: well i finished.. the priming was easy, but the paint was a b!tch!.. it like sprayed forward and sideways for some reason.. n i since i already took the pieces off, i cant go out n buy another can (my other car has no insurance) it looks fine, but i got friggin paint all over my hands! i tried turpintine, but that didnt get the paint off.. wat will?

nevermind.. nailpolish remover worked wonders

 
Rep Power: 0

show me some pics when it gets dried and u put it back together...Hopefully it came out good...Lata

Gordo

 
Rep Power: 341

im ganna paint the valve cover (i think thats wat it is) but i gatta go out n get black paint to paint the words

 
Rep Power: 0

That looks quite nice...Very good job...I will be attempting the same thing shortly...I might wait till I get an inkake!...I don't wanna spend too much on one tho...

Bobby...where did you get yours from...I know yours was alot cheaper...Also, does yours have the bend coming out of the engine...cause I have the generic F.Upper strut bar...so the Injen SRI and only a few generics will actually fit with the bar...

Off to study for a Stats quiz...Adios..Mark

 
Rep Power: 0

I got mine off E-bay...import tech brand I think. Yes it does have the bend in it. I have a pic in my member's section if you want to see it. I do see some older flat types on E-bay still though. Good luck!

 
Rep Power: 0

I just took a look at it...Yah...yours won't fit with my strut bar......its ok...I might just have to get the Injen SRI...we'll see...It will at least make my engine look nicer!...

Ahh well..

 
Rep Power: 0

Can you still get the Injen SRI like that? I heard that that was the old style and that Injen went with the raised one now. Not sure how true it is. Later all!

 
Rep Power: 0

I don't know if they do...I haven't heard that they changed it...If they do...I'm gonna have to buy a used one or another brand...Ah well..

 
Rep Power: 0

Getting a little excited about the house now. Think I am going to relocate my collar ties in my garage so I can have a taller ceiling but less upper storage. Oh well, I would rather have more head room. My car is filthy too, stupid sub zero weather! Well, is everyone ready for Srping? Dumb question huh? [IMG]i/expressions/face-icon-small-tongue.gif[/IMG]

 
Rep Power: 0

Yeah im ready for spring . hey platnum! how serious are you about the rims?

 
Rep Power: 341

ok, this had to of been THE worst first full day of spring.. it was cold as frick, and IT SNOWED! AHHH! but i painted the valve cover all red.. ganna paint the letters black once i pick up a paint brush.. i got black spray paint. im planning on just spraying most of it in a container and just dip the brush in there.. i'll post pics after im done.

 
Rep Power: 0

xHoteKx that monkey shaking its a$$ is hipnotizing! I am sitting here staring at it and then say "why am i staring at this monkey shaking its a$$?" LOL

 
Rep Power: 341

lol i know! my friend sent me that to use as my AIM icon.. but i'll use it on here instead.. it rules.. oh yea bobby, did you get hasseled by cops about your tint? cuz i might get it if i get enough money from my friends on my bday.. im ganna get injen SRI for my bday present for sure though

 
Rep Power: 341

does anyone else think this season got mixed with winter? cuz i dont think im the only one that thinks this.

 
Rep Power: 0

Yea I can see where your coming from.....I HATE THIS WEATHER!!
Anyone crusin tonight? Gratiot...?

scott

 
Rep Power: 0

Hey scott is your car all done up? mine isn't so i won't be crusing for a while probably not till the end of april

 
Rep Power: 0

Wasup guys...

Stylin...I'm interested in the rims for sure...but now I gotta get that windshield fixed first...I'm going to Honda early morning Monday to see what's up...If they try to charge me for it I'm gonna be pissed...I just know they might try to screw me around saying it was road damage...but I know it's not..!! Nothing has hit the glass...plus its not spider webbing...its like two parelled cracks...I'll try to take a pic to show u guys...

As far a the rims go...If I can get this fixed for free...Let's see if we can work something out...!!! I'll let you guys know wasup!

l8r...Mark

 
Rep Power: 0

My car is almost in the final stages. Everything is almost on, still waiting on my rims to get done.

scott

 
Rep Power: 0

scott and edgar...u 2 are gonna have killa carz compared to me...I'm for sure excited to see what they look like in person

Stylin...I'll let u know how tommorrow goes with the dealer about the windshield...hopefully i wont have to pay...

lata yo'z...mark