Rep Power: 0

Ok first off car wont crank because of injectors already narrowed it down to that but it is not the injectors themselves its the wiring to them im not getting any power to them i took them off and hotwired them and they work i jus cant get power to the injector plugs any ideas? thnx Tracy

 
Rep Power: 812

retrace the wires, you could have a snapped wire somewhere

 
Rep Power: 0

i already checked the wires theres no snips or anything thats why im so lost is there any sensors or anything?

 
Rep Power: 0

When you turn on your ignition, can you hear your fuel pump? If not you can start by cheching your PGM-FI main relay relay. This relay is located at the right side of the cowl.
One relay is energized whenever the ignition is on which supplies the battery voltage to the ECM/PCM power to the fuel injectors and power for the second relay. The second relay is energized for two seconds when the ignition is switched ON, and when the engine is running, to supply power to the fuel pump.

 
Rep Power: 0

i replaced the wiring harness and it works now thanx guys