Rep Power: 0

Ok, Have the wonderful CDT Audio EURO 630 UPSTAGE. They are 6 1/2" by 2 7/8" deep.

2005 Honda Civic, COUPE


I have 2 options.

1. Move the front window rail back .25 or .5 inches with a spacer to make the window me around .5" further from the back of the speaker. I am wondering if this will break or mess anything up. Need honest help, not what people think.

2. Leave the window rail where it is and just leave my window .75" up and never roll them all the way down and tell people that ride in my car.

Chris

 
Rep Power: 786

they won't clear? my hertz hi-energy are 2.63" deep and fit fine

maybe make a spacer out of 1/4" wood?

 
Rep Power: 308

Buy a spacer, problem solved.

 
Rep Power: 0

Ok, the speaker will fit with a 3/4" SPACER but they are braxial, so there is a .5" bracket to hold the tweeter on the speaker.

HINCE my question. WILL IT HURT ANYTHING TO MOVE THE WINDOW TRACK BACK .5"

 
Rep Power: 308

I would not move it. Work with the speakers and the mounting options.

 
Rep Power: 312

screw moving crap.. just trim the plastic on the door and you will gain that extra .5

 
Rep Power: 336

yeah my audio place had 2 order some spacers for me. but i still havent gotten my speakers installed

 
Rep Power: 312

just gut yer stock speakers and use them as the spacer.. seal them up with a lil caulk and yer set..

i think i made a diy on how to do this somewhere..

 
Rep Power: 0

No one is listening. I HAVE SPACERS. My speaker is 2 7/8" deep, bottom depth, and around 1/2" top depth. Ok, with my magnet barley hitting the window where is is factory, is around 2"'s, so 3/4" spacer + .5" top depth, I still come up short.

So cant just shave or wink, Either move the window track back .5"'s or leave window .75" up to miss the spaker magnet

 
Rep Power: 312

yeah you can move the window but yer better off just getting a second spacer and cutting the inside of the door pannel a lil bit.. you can shave off about half an inch..