Rep Power: 0

quick question, my sub box always rolls around in my trunk and its pretty annoying. what should i use to hold it down? Ive already tried velcro. thx

 
Rep Power: 0

I screwed small brackets into the cardboard floor around my box. It doesn't move around much.

 
Rep Power: 786

velcro holds pretty good if you don't haul *** around every corner

 
Rep Power: 0

how about those pads you put under rugs to prevent them from moving around.

 
Rep Power: 319

heres what my friend did...on the back of the sub box he put on 3 loop type hooks on the back of his subbox than he got a black rope/bungeecoard of some sort which u could barely see and tied it down to the rear panel above the sub box where the stock speakers sit...and it doesnt move at all and if he wants to move it he just un ties/hooks it and bam there u have it

 
Rep Power: 0

yeah I was going to say bungees

 
Rep Power: 0

I just made the box big enough to span with width of the trunk and put my amp on it no problems.

 
Rep Power: 0

put l shaped brackets into the box in the front thats wat i did wit mine and it never moved again

 
Rep Power: 360

have a rear strut bar?

then make a bracket on each side that connects to the box and the strut bar

 
Rep Power: 0

Carpet Tack Strips on the bottom. They sell them at your local Home Depot for $1 each. One side goes into the box, the other sticks to the carpet.

 
Rep Power: 328

Replace the cardboar crap floor with MDF. Unload (remove the sub) from teh box. Screw it to the floor through the bottom of the box from the inside. Reload sub box. If you don't want to do that, still replace the trunk floor then use L-brackets.

 
Rep Power: 0

this is very interesting! im also annoyed by the fact that it always move around..

i ended up using the anti slip pad......big one....bought from wal-mart..

i put it underneath the carpet.......however, if i made sharp cornering, it'll still move around a bit.....

what is MDF?

 
Rep Power: 328

Medium Density Fiberboard. The same thing your sub box is constructed of (most likely).

 
Rep Power: 0

is it available for our vic...or do we have to cut it ourself? =) hehe

i've to say that the board right now sucked...it's to thin....it's also kind of bended by the sub box

 
Rep Power: 0

Build A Floor Out Of Some Plywood Or Mdf And Screw The B*tch To The Floor.......not Rocket Sience

 
Rep Power: 294

They sell MDF at TheHomeDepot & Lowes and tehre's also a DIY made by Diskreet for a custom trunk floor.

 
Rep Power: 348

into the fram