Replacement Pedals
Thread Starter
Registered!!
iTrader: (1)
Joined: Apr 2001
Posts: 2,609
Likes: 0
From: Houston, Texas, US
Rep Power: 0 
Replacement Pedals
I want to get replacement pedals, not just pedal covers! Anybody recomend any that will fit our cars? Or are most pedals a universal size like shift *****? I want the whole silver w/ red insert look, help me out guys! Thanks!
Registered!!
Joined: Aug 2001
Posts: 754
Likes: 0
From: Littleton, CO and Peoria, IL, Colorado, US
Rep Power: 0 if i remember right, the pedals are welded onto the levers to control the gas/brake/clutch, so you can't really replace the pedals completely without a lot of work. if you do it though, post pics, that would be tight!
Post some pics if you do the deed![IMG]i/expressions/face-icon-small-smile.gif[/IMG] 
Registered!!
iTrader: (4)
Joined: Apr 2001
Posts: 1,904
Likes: 0
From: Pearl, Mississippi, US
Rep Power: 0 I have some genuine Honda pedals from Japan that you actually have to drill holes into the metal base pedals (after you remove the rubber boot) and screw on. The brake & clutch will be easy but the gas pedal in our car is not just a metal pedal with a rubber boot on it. Going to take a little more effort to make it work.
Thread Starter
Registered!!
iTrader: (1)
Joined: Apr 2001
Posts: 2,609
Likes: 0
From: Houston, Texas, US
Rep Power: 0 I had pedal covers and they just sucked ***. Looks like I have something to do then, if its gonna take alot of work to replace the pedals....time to do some research!
Thread Starter
Registered!!
iTrader: (1)
Joined: Apr 2001
Posts: 2,609
Likes: 0
From: Houston, Texas, US
Rep Power: 0 Well I went out and took a looksie...the clutch and brake pedals are covered by some rubber **** covers, the pedals themselves are black metal welded to rods and junk. I can get some nice pedal covers "momo or sparco" and drill them into those pedals easlily, but the gas is different. Its plastic and is connected in a strange way. I think it is screwed in, but I couldn't look on the side of the pedal close to the passenger as there is no freaking room over there. Maybe I could drill there too. Shouldn't be too hard, and with them drilled in they would stay put. Oh and the dead pedal can be taken out, its a bolt on.
Registered!!
Joined: Aug 2001
Posts: 159
Likes: 0
From: New Orleans, Louisiana, US
Rep Power: 0 I replaced mine with indeglo petals and all i had to do was take off the black rubber piece and clamp on the new ones worked great. most should be universal though!!!!
GreenVenom
GreenVenom
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
thesushiboy
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
Apr 12, 2015 02:54 AM
