Rep Power: 0

I just replaced my head gasket after it failed during an overheat. Now after I replaced everything, and it starts but it seems like the clutch isn't working because I push it in to start the car but once I try to put it in gear it doesnt move but the rpms go up. Nothing happens when I pop the clutch. No stalls or bouncing forward

 
Rep Power: 211

Check the inner CV axles to make sure they didn't pop out of the differential.

 
Rep Power: 0

I will check to see if they did but I am worried the clutch burnt out or something. From me attempting to move my car off the freeway where it blew the head gasket.

 
Rep Power: 223

Put it in gear with the engine off and see if it will roll

 
Rep Power: 0

ok I will do that when I get home and report back. If it does roll what will that mean to me?

 
Rep Power: 223

Clutch can't grip the flywheel

 
Rep Power: 0

Oh ok. Meaning I would have to replace the clutch right?

 
Rep Power: 223

Yep

 
Rep Power: 0

So after replacing the clutch now I cant get it to idle correctly. It starts and it sounds like it is running off. Then will kill it self before it even warms up. Also I noticed as I step on the gas the temp gauge goes up