Rep Power: 0

When i am driving my car and i go around a somewhat sharp curve my exhuast pipe rattles. I know it has to be banging on something close to the header, but i can't figure out how to stop it from moving. If you've had a similiar problem, i would greatly appreicate your help. Thanks!

 
Rep Power: 313

mine rattles a little when its idle, kinda weird. i turn it on, and it rattles a little, dont hear it tho once i drive

 
Rep Power: 0

it is hitting the sway bar atleast mine does. you need to raise it with adjustable hangers. they don't cost much. Mune rattle when i first start up and then if anyone is in my passanger seat. But i have a thermal R&D. so look closely at the thin bar behind the wheels.

 
Rep Power: 0

what model is your car? I know on my old 99 ex, the cat would rattle at idle. Prolly a honeycomb or two inside the car broke off. Id say bring it to honda for some insight.

 
Rep Power: 0

Mine rattled twice. One was the clamp right in the middle hitting a metal plate under the car, and the second was the first highflow cat was broken and needed to be replaced, but the shop I ordered it fixed it no problem.

 
Rep Power: 308

If it's hitting the underside of the car, try facing the clamps in a different direction....? Mine only rattles when i'm idle. The tip shakes against the rear bumper but it only happens when the car is at an angle, like on a hill. You might consider paying money to get it welded. That should fix all your problems.