Cluster Gauge problems
Thread Starter
Registered!!
Joined: Mar 2012
Posts: 1
Likes: 0
Rep Power: 0 
Cluster Gauge problems
These are the problems in my 2000 Civic EX:
Gas gauge slowly climbs to full.
Temp gauge slowly climbe to red after car is on for about 2 minutes.
None of the lights work besides brake, check engine, etc.
Dash lights dont work.
I accidently crossed a + and a - when changinjg out my LED's and burned the circut board. I replaced the circut board with a new OEM one (yes. it is the correct one) and when I turned the car on this crap happened. I checked the fuses. Any suggestions?
Thanks!
Gas gauge slowly climbs to full.
Temp gauge slowly climbe to red after car is on for about 2 minutes.
None of the lights work besides brake, check engine, etc.
Dash lights dont work.
I accidently crossed a + and a - when changinjg out my LED's and burned the circut board. I replaced the circut board with a new OEM one (yes. it is the correct one) and when I turned the car on this crap happened. I checked the fuses. Any suggestions?
Thanks!
Lord Sin
Joined: Jul 2012
Posts: 211
Likes: 0
From: Denver, Co
Rep Power: 0 
Re: Cluster Gauge problems
Take another cluster from a junked civic and see if that works. If fuses are good and the LEDs aren't blown that's a pretty cheep inexpensive way to see if the board or cluster gauge works. You could also use a voltmeter to check the board and gauges
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
HiImBrandon
Mechanical Problems/Vehicle Issues and Fix-it Forum
4
Jun 1, 2015 07:34 AM
jimmyfloyd
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
May 20, 2015 07:06 PM
Ma213802
Electrical, Wiring, and In Car Entertainment
8
May 18, 2015 07:01 AM
bahena08
7th Generation Civic 2001 - 2005
2
Apr 11, 2015 05:09 PM
guy
General Automotive Discussion
3
Dec 25, 2001 09:51 PM
