Finally got dynoed! *Graph Posted*
#1
7th Gen Photographer
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Atlantic City, NJ
Age: 40
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 256 Finally got dynoed! *Graph Posted*
Went to Philly Dyno Works last night and finally got rid of the basemap of death. After rebuilding from a blown headgasket then running pig rich for 1 month, I'm finally tuned.
My biggest number put down was 208hp and 191lb/ft at 10psi, but that wasn't a good daily driver setup - it started leaning out near redline.
My current tune is for 194hp and 179lb/ft at 9psi with about 80% duty on the injectors.
All this was at 95ºF! Dyno chart soon to come!
My biggest number put down was 208hp and 191lb/ft at 10psi, but that wasn't a good daily driver setup - it started leaning out near redline.
My current tune is for 194hp and 179lb/ft at 9psi with about 80% duty on the injectors.
All this was at 95ºF! Dyno chart soon to come!
Last edited by LogicWavelength; 06-22-2007 at 10:16 AM.
#3
Registered!!
iTrader: (7)
Join Date: Oct 2004
Location: New Jersey
Age: 41
Posts: 9,070
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 336 Re: Finally got dynoed!
congrats man! once im all finished up with my build, will have to take some pics down in AC!
check out my thread of all my parts!
Steve
check out my thread of all my parts!
Steve
Last edited by exturbo6; 06-22-2007 at 09:57 AM.
#8
7th Gen Photographer
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Atlantic City, NJ
Age: 40
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 256 Re: Finally got dynoed! *Graph Posted*
That first run's torque curve is scary. It was shooting a little black smoke towards the end of the pull because of all the unburnt fuel. I had my fingers crossed she didn't pop.
Think about this for a second... it was obviously already turboed on the first run... and I still made 50 more peak HP during the tuning.
Think about this for a second... it was obviously already turboed on the first run... and I still made 50 more peak HP during the tuning.
#10
7th Gen Photographer
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Atlantic City, NJ
Age: 40
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 256 Re: Finally got dynoed! *Graph Posted*
Engine/Performance Modifications:
ACT HDSS clutch
ACT XACT flywheel
REVO short shifter (RSX 5 spd)
A'PEXi World Sport II cat-back exhaust
Garrett .48 compression, .60 inlet T3/T4 turbo
SF manifold
SFP intercooler piping
38mm External TiAL WG w/dump tube
Spearco intercooler
GReddy Type S BOV
GReddy E-Manage
Turbo XS manual boost controller
custom downpipe w/cat
WISECO 8.8:1 pistons
Crower Forced Induction connecting rods
ARP head studs
RSX-S injectors
Golden Eagle vacuum manifold
Golden Eagle oil filter sandwich plate
ACT HDSS clutch
ACT XACT flywheel
REVO short shifter (RSX 5 spd)
A'PEXi World Sport II cat-back exhaust
Garrett .48 compression, .60 inlet T3/T4 turbo
SF manifold
SFP intercooler piping
38mm External TiAL WG w/dump tube
Spearco intercooler
GReddy Type S BOV
GReddy E-Manage
Turbo XS manual boost controller
custom downpipe w/cat
WISECO 8.8:1 pistons
Crower Forced Induction connecting rods
ARP head studs
RSX-S injectors
Golden Eagle vacuum manifold
Golden Eagle oil filter sandwich plate
#11
7th Gen Photographer
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Atlantic City, NJ
Age: 40
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 256 Re: Finally got dynoed! *Graph Posted*
I think I asked this before... the guys at Philly Dyno Works said they know of a returnless rising rate FPR that they installed in a RSX. Could that be installed with some 440's or 550's for an RSX and a 255l/hr pump?
Does this thing even exist? Is it safe?
Does this thing even exist? Is it safe?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Munzy
7th Generation Civic 2001 - 2005
21
10-07-2015 07:48 AM
Touge
Canada East
0
09-23-2015 11:19 PM