Supercharged d17... Something to think about...
10-15-2005
#31
Registered!!
iTrader: (8)
Join Date: Mar 2003
Location: Zulu Alpha Tango Foxtrot
Age: 46
Posts: 3,024
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 
I was looking at the engine bay today, after reading this. I don't think that clearance with the firewall is really an issue (as witnessed by the D16 manifold). I believe the real problem is there is no room for the pulley.
Look at the setup on JR's web site - where the pulley is approximately located. Then look under our hood. If you look at the where the belts sit, than look straight back you will see the issue - there is a cross member in the way. I don't think that a SC will fit, period, due to the fact there is no place to line up the SC pulley - there is no clearance.
Look at the setup on JR's web site - where the pulley is approximately located. Then look under our hood. If you look at the where the belts sit, than look straight back you will see the issue - there is a cross member in the way. I don't think that a SC will fit, period, due to the fact there is no place to line up the SC pulley - there is no clearance.
10-15-2005
#33
7thgens official a$$hole
iTrader: (5)
Join Date: Oct 2004
Location: St.Louis
Age: 38
Posts: 11,571
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 356 
Originally Posted by gearbox
a member is getting an electric driven supercharger installed to run 6psi.
10-15-2005
#34
7thgen Terminator Ninja
Join Date: Feb 2004
Location: Phoenix, Az
Age: 39
Posts: 3,854
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288
Originally Posted by gearbox
a member is getting an electric driven supercharger installed to run 6psi.
j/k
10-15-2005
#39
Registered!!
iTrader: (2)
Join Date: Oct 2001
Location: Hagerstown, MD
Age: 40
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I don't get it people are always saying "search" and when people do and bring back old threads its like "dude let it die". I say search for a topic like this and let the other misc threads die.
10-15-2005
#40
7thgen Terminator Ninja
Join Date: Feb 2004
Location: Phoenix, Az
Age: 39
Posts: 3,854
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288
Originally Posted by AznThug08
I don't get it people are always saying "search" and when people do and bring back old threads its like "dude let it die". I say search for a topic like this and let the other misc threads die.
10-16-2005
#41
Retired - SoCal FI Mod
iTrader: (4)
Join Date: Jan 2002
Location: Boston, MA
Age: 40
Posts: 3,139
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by opto_isolator
I was looking at the engine bay today, after reading this. I don't think that clearance with the firewall is really an issue (as witnessed by the D16 manifold). I believe the real problem is there is no room for the pulley.
Look at the setup on JR's web site - where the pulley is approximately located. Then look under our hood. If you look at the where the belts sit, than look straight back you will see the issue - there is a cross member in the way. I don't think that a SC will fit, period, due to the fact there is no place to line up the SC pulley - there is no clearance.
Look at the setup on JR's web site - where the pulley is approximately located. Then look under our hood. If you look at the where the belts sit, than look straight back you will see the issue - there is a cross member in the way. I don't think that a SC will fit, period, due to the fact there is no place to line up the SC pulley - there is no clearance.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
tomas6791
8th & 9th Generation Civic 2006 - 2015
0
09-11-2015 06:47 PM
mrcell24
6th Generation Civic 1996 - 2000
4
05-19-2015 10:02 AM
92c000rpmd17, b18, body, chip, d16, d17, intake, k20, manifold, performance, supercharge, supercharged, supercharger, throttle, venom, vortech
