Rep Power: 511

saw this on ebay and it looks kinda decent, although it is OBX. ive seen the OBX log manifolds on ebay before, but never an equal length one (at least it looks like one). it says it will bolt up to a t3/t4, but do you think it would also work with a t3 super 60 and internal wastegate? thanks for the advice.



http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

 
Rep Power: 0

since you internal gated you can just block off the flange for where the extrenal would be. People do it all time. Not to flashy but get the job done. Also gives you the option to switch it up in the future. But the Mani looks nice to me.
I'd be a little worried about clearance issues with the radiator fan from looking at the picture but i think they are smarter than that and at least test fitted for that.

 
Rep Power: 584

thats not going to work on ur car, do u see how long that thing is, the manifold alone will hit the radiator fan, and u still have to put the turbo on the end of it, chop off the front end of ur car and weld a longer one on and then it might fit

 
Rep Power: 0

ask them first if the manifold in the picture is the exact one...sometimes they dont always show the correct mani but the series motor listed...but it wil look like that but with shorter runners...but if that is the one, i dont think that it will fit...the runners look too long...

 
Rep Power: 511

no, that is not the exact one. that is the manifold for the rsx. im gonna e-mail them and ask for a picture of the one for the 7thgen.