Rep Power: 0

just wondering how much power you could get out of the 3100 "stage 1" turbo, i saw the possible stage 2 could produce 450 so how much could the normal set up produce assuming the engines built etc, and second if i wanted 300 hp what internals would be needed and what kinda psi would i be running approximatly? i have an ex if that matters , sorry kinda newbie with turbos etc
thanks
chris

 
Rep Power: 608

if u want to run b/n 10 and 15 psi, u would need forged pistions at least and u are better off getting valves, springs and retainers. If u want to run over 15 psi, u should get ur blocked sleeved. Actually, sleeving it for 12-13 psi would be safer. You should also get a PnP head, intake mani with bored TB. 300HP is achievible, but u need to have a built bottom and top end, and u will prolly need to run about 15 psi to hit 300HP.

 
Rep Power: 0

im gona be near 300WHP with stock intake mani, tb, and bottom end.. only 9-10psi... wait till spring..................... 5 psi = 185 to the wheels... im @ 9 now, about 225 to the wheels if not more with my mods... with my next few mods i will break 290 or so....

 
Rep Power: 608

^^^ when u getting the PnP head ?

 
Rep Power: 313

The $3100 turbo kit is good for about 275-300 whp without straining the turbo. If you get the upgraded turbo, it should be good for about 350 whp.

 
Rep Power: 0

and i have the urpgaded one mikey, you know that ! lmao..... im getting pnp head in spring i believe, whenever it gets warm, saving now...

 
Rep Power: 327

future, in another thread you said you should have about 270whp, now 300?

Just seein which one you think you'll have

 
Rep Power: 585

id rather just know what ur planning on doing secret or not, bc im not visualizing a 300whp on stock everything, at 9 psi, and maybe a PnP head, it may be possible, im not doubting u bc we've gone through the doubt stage before, but until it happens.......

 
Rep Power: 327

Yes yes this is tru.

a turbo Pnp. he DOES of the underdrive pulley, and upgraded turbo and alcy, so I guess it's "possible" but unlikely. I would think the 270 you stated earlier would be slightly more accurate. either way, dyno it up!

 
Rep Power: 375

wow so cool

 
Rep Power: 608

yeah, i agree with madwheel and 2001Civic, u will prolly be around the 270 mark. I think that u will have to build that bottom end first and turn up the boost to hit 300hp......but please prove us wrong future. Be the first to do it.