Rep Power: 0

I know there are a lot of posts about turbos, etc. However I can't seem to get a right answer, so if anyone can help me out please do. First I was wondering what is up with SF, I am really interested in his kit, but it seems like his customer service is hurting. Anyway can people help me out, this is what I want to do:

Upgraded turbo
Equal length manifold
intercooler

Basically the SF kit. However I wanted to know if it is safe to run 8 psi on a 01 EX coupe MT. That is the boost I want to run. I didn't know if alcohol injection is needed or not, and what other parts I need to get. I have the 2 gauges picked out, but what else do I need. I am saving now, but I kinda need a ballpark figure for how much it will all cost. Also I want to chrome my pipes so is that more than powder coating?

The last thing I was wondering is do I need a new front bumper to hide the intercooler than the OEM bumper?? Let me know guys. Thanks.

Also if I needed a new front bumper would I need the side skirts, etc. And if you guys could lay out some prices I would appreciate it so I can save this forum for reference.

 
Rep Power: 0

ex with the alc injection shud be able to boost 11-12 psi i think, and little less with out. u dont really NEED the guages, or anything else really, just good to have to make sure ur not gonna f up ur car. turbo timer and electronic boost controller are nice, im saving up for those while waiting for kit to come, and new spark plugs.

dunno about the powder coating, i havent asked them for color yet or wutever. probably every bumper will show the intercooler through the holes, u can probably put black mesh or sumthin infront of IC to hide it or sumthin


edit
i paid around 3500 for the kit, with bigger turbo, equal length manifold, and alc injection
225 for 2 autometer c2 guages
turbo timer havent bought yet, the apexi is on ebay for around 80-90
greddy profec b spec 2 boost controller, for 290 but still looking for better deal

 
Rep Power: 0

Thanks, the question I have is do I need the alcohol injection if I am runnin 8 psi??

 
Rep Power: 0

The other thing is I am not worried about seeing the intercooler, but does it hang lower than the stock bumper?

 
Rep Power: 312

The intercooler sits flush with the lower core support of the car. It pushes the bottom of the bumper down a hair, but that is something that will be fixed if you use the stock push-in-clips or some zip ties.

Also, i have to apologize for the lagging on my replies and answering questions....

I am a college student, and i had finals the past 2 weeks, and with that and working full time, i had very little time to provide the quality of service that i usually have.

Anyway, finals are done, and i am back.