>>>Speedracer32's custom enclosure<<< w/ PICS!!
Thread Starter
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 2,317
Likes: 0
From: PG county, MD, Maryland, US
Rep Power: 0 
Speedracer32's custom enclosure
here it goes
it's nothing too special but i did do it myself and am beyond proud of myself. there are still a few minor thing that need to be trimmed and tighten but you get the point.
i'll probably take some better pics tomorrow
i also install my 6x9's and might I say i never will again. it was a real headache gettin that sH@+ off.
all comments welcomed
the DVD goes under the backseat and i stil have to cut the hole for the try to pop out
playstation still sit on top
...still waitn on rims to arrive and i'll post new pics wit them
it's nothing too special but i did do it myself and am beyond proud of myself. there are still a few minor thing that need to be trimmed and tighten but you get the point.
i'll probably take some better pics tomorrow
i also install my 6x9's and might I say i never will again. it was a real headache gettin that sH@+ off.
all comments welcomed
the DVD goes under the backseat and i stil have to cut the hole for the try to pop out
playstation still sit on top
...still waitn on rims to arrive and i'll post new pics wit them
Thread Starter
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 2,317
Likes: 0
From: PG county, MD, Maryland, US
Rep Power: 0 Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] back corner.jpg (19 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] backseat.jpg (29 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] everything on the ground.jpg (29 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] front heads on.jpg (15 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] kenwoods installed.jpg (30 Kb)
Thread Starter
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 2,317
Likes: 0
From: PG county, MD, Maryland, US
Rep Power: 0 i could probably make a DIY for this too
i've taken enough pictures to.
i don't know if yah can tell but on the back seat there is plexiglass in the middle
i'm puttin my logo on that and behind there is a mirror (to reflect the neon tube) and my rear upper strut[IMG]i/expressions/face-icon-small-smile.gif[/IMG]
ima try to take some pics after classes today
i've taken enough pictures to.
i don't know if yah can tell but on the back seat there is plexiglass in the middle
i'm puttin my logo on that and behind there is a mirror (to reflect the neon tube) and my rear upper strut[IMG]i/expressions/face-icon-small-smile.gif[/IMG]
ima try to take some pics after classes today
Thread Starter
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 2,317
Likes: 0
From: PG county, MD, Maryland, US
Rep Power: 0 yeh only one. i just wanted enough bass to rattle the trunk. if anything i'd up it to a 15" and get a stronger amp but im not worried about right now.
the was i have it set up is so i can hide stuff behind it.
i plan on puttin Nitrous ofn one side and i guess storage on the other like for car cleanin stuff.
im gettin a cap so i wont drain my battery and a fire extinguisher to go inside the car on the side of the inner panels where the back seat use to fold.
My rims came today and i cant wait til iget em on.hopefully buy the end of the week.
i have to go home and get them
the was i have it set up is so i can hide stuff behind it.
i plan on puttin Nitrous ofn one side and i guess storage on the other like for car cleanin stuff.
im gettin a cap so i wont drain my battery and a fire extinguisher to go inside the car on the side of the inner panels where the back seat use to fold.
My rims came today and i cant wait til iget em on.hopefully buy the end of the week.
i have to go home and get them
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Adam925
Mechanical Problems/Vehicle Issues and Fix-it Forum
12
Nov 19, 2019 10:56 AM
greentoaster
Archive - Parts for Sale
1
Sep 1, 2015 12:18 AM
pinkytoe
General Automotive Discussion
147
Mar 26, 2002 05:53 AM
