Speedracer32's custom enclosure
 

here it goes
it's nothing too special but i did do it myself and am beyond proud of myself. there are still a few minor thing that need to be trimmed and tighten but you get the point.
i'll probably take some better pics tomorrow
i also install my 6x9's and might I say i never will again. it was a real headache gettin that sH@+ off.
all comments welcomed

http://www.7thgencivic.com/forum/inc...20ground%2Ejpg
http://www.7thgencivic.com/forum/inc...backseat%2Ejpg
the DVD goes under the backseat and i stil have to cut the hole for the try to pop out
playstation still sit on top
http://www.7thgencivic.com/forum/inc...s=ACF47B%2Ejpg
http://www.7thgencivic.com/forum/inc...nstalled%2Ejpg
http://www.7thgencivic.com/forum/inc...ads%20on%2Ejpg
http://www.7thgencivic.com/forum/inc...20corner%2Ejpg:)
...still waitn on rims to arrive and i'll post new pics wit them

xxxxxxx

might wanna fix your links

Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] back corner.jpg (19 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] backseat.jpg (29 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] everything on the ground.jpg (29 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] front heads on.jpg (15 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] kenwoods installed.jpg (30 Kb)

how come i can see thme but yah can't
how about now....
http://www.7thgencivic.com/old_attac...backseat%2Ejpg
http://www.7thgencivic.com/old_attac...20corner%2Ejpg
http://www.7thgencivic.com/old_attachments/ACF47B%2Ejpg
http://www.7thgencivic.com/old_attac...20ground%2Ejpg
http://www.7thgencivic.com/old_attac...ads%20on%2Ejpg
http://www.7thgencivic.com/old_attac...nstalled%2Ejpg

too late:_doh:

i saw that too but it's coo
thanx:tup:

i saw that too but it's coo
thanx:tup:

looks good. DIY!!!

i could probably make a DIY for this too
i've taken enough pictures to.
i don't know if yah can tell but on the back seat there is plexiglass in the middle
i'm puttin my logo on that and behind there is a mirror (to reflect the neon tube) and my rear upper strut[IMG]i/expressions/face-icon-small-smile.gif[/IMG]
ima try to take some pics after classes today

Looks good . . . but only 1 sub? [IMG]i/expressions/face-icon-small-confused.gif[/IMG]

Either way, that's tight. Nice DIY.:tup:

yeh only one. i just wanted enough bass to rattle the trunk. if anything i'd up it to a 15" and get a stronger amp but im not worried about right now.
the was i have it set up is so i can hide stuff behind it.
i plan on puttin Nitrous ofn one side and i guess storage on the other like for car cleanin stuff.
im gettin a cap so i wont drain my battery and a fire extinguisher to go inside the car on the side of the inner panels where the back seat use to fold.
My rims came today and i cant wait til iget em on.hopefully buy the end of the week.
i have to go home and get them