Maxtierney's D17A2 Build Thread
#1
EM2ti
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: San Diego, CA
Posts: 1,102
Likes: 0
Received 3 Likes
on
3 Posts
Rep Power: 269 Maxtierney's D17A2 Build Thread
What? A D17 build? Heck, why not? I've been reading about how this engine has no natural potential for 10+ years, I figured I'd give it a shot. Plus, it's smog friendly and not a project that leaves me car less, if I don't complete it over the weekend. It's relatively cheap and gives me an engine for the next 200k miles. Beats a new car payment. Be warned, this may take a while, cause I've already got a perfectly good engine in the EM2 now, and a K20A waiting in the wings. The stars just sort of aligned for this build.
So what's the plan? Not sure yet, but I'll he picking up a long block soon. Found one for $100. Next is a D16Y8 intake off eBay. Pann Auto sold me a Stage 1 Crower for $275. I'll save the hotter cams and K Pro for later, this is sort of a budget build for now. Haha. Let's get this out of the way now. I'm not a mechanic, by any means, but I am pretty good with my hands and have the resources to get things done. I'll be hitting you all up for some advice more often than not. Let's start with these:
1) Will a JUN cam pulley for the Pre-1999 SOHC D-16 work for me. Pann Auto has one, and it just looks badass. I really want this JDM piece of eye candy.
2) They also have an old school JDM GUDE(?) D series throttle body for sale. Ultra rare, old school part with billet, anodized parts. Wow, just wow. Same question.
3) I plan on using titanium retainers, coated valves, supertech valve springs, etc. on the head. Any drawbacks on use with the stage one cam?
4) The head, of course, will be ported and polished. Any other advice concerning the head?
5) I'll be trying to get custom made Arias forged pistons and connecting rods. Don't ask why, let's just say I have the same namesake as the company. I used the same pistons in my beetles. Can I go higher compression?
6) As for the crank, what are my options here?
That's it for now. I don't want to get ahead of myself.
What's the goal here? Ultimately, a badass D17, of course. Worst case scenario, I'll have a rebuilt head and Y8 manifold on my existing engine.
Let the journey begin...
So what's the plan? Not sure yet, but I'll he picking up a long block soon. Found one for $100. Next is a D16Y8 intake off eBay. Pann Auto sold me a Stage 1 Crower for $275. I'll save the hotter cams and K Pro for later, this is sort of a budget build for now. Haha. Let's get this out of the way now. I'm not a mechanic, by any means, but I am pretty good with my hands and have the resources to get things done. I'll be hitting you all up for some advice more often than not. Let's start with these:
1) Will a JUN cam pulley for the Pre-1999 SOHC D-16 work for me. Pann Auto has one, and it just looks badass. I really want this JDM piece of eye candy.
2) They also have an old school JDM GUDE(?) D series throttle body for sale. Ultra rare, old school part with billet, anodized parts. Wow, just wow. Same question.
3) I plan on using titanium retainers, coated valves, supertech valve springs, etc. on the head. Any drawbacks on use with the stage one cam?
4) The head, of course, will be ported and polished. Any other advice concerning the head?
5) I'll be trying to get custom made Arias forged pistons and connecting rods. Don't ask why, let's just say I have the same namesake as the company. I used the same pistons in my beetles. Can I go higher compression?
6) As for the crank, what are my options here?
That's it for now. I don't want to get ahead of myself.
What's the goal here? Ultimately, a badass D17, of course. Worst case scenario, I'll have a rebuilt head and Y8 manifold on my existing engine.
Let the journey begin...
Last edited by maxtierney; 01-31-2012 at 06:36 PM.
#2
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,787
Received 1,443 Likes
on
1,198 Posts
Rep Power: 338 Re: Maxtierney's D17A2 Build Thread
don't have the answers, but good luck, sir! will be watching and if i can help (not likely) i will chime in
#6
Busy Speeding!!
Join Date: Nov 2010
Location: Wisconsin
Age: 30
Posts: 581
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 170 Re: Maxtierney's D17A2 Build Thread
I think the throttle body will fit the y8 manifold pretty easily. You didn't say what year and trim it's from though. And yeah, you need a piggy back or standalone to do the y8 manifold swap. The stock D17 computer has a panic attack when you make any major intake changes smh...
As for the crank, you could stay stock. I heard Honda's cranks can last well up to 500+ horsepower. But a nice billet crank would be pretty sweet.
Heres some info on the cam gear
http://www.d-series.org/forums/engin...-d16-head.html
Looks like you would just have to use a y8 camshaft. If you want I can compare the specs of a stock y8 cam and an a2 cam tomorrow
Good luck on the build though. Sounds like it's going to be pretty sweet.
As for the crank, you could stay stock. I heard Honda's cranks can last well up to 500+ horsepower. But a nice billet crank would be pretty sweet.
Heres some info on the cam gear
http://www.d-series.org/forums/engin...-d16-head.html
Looks like you would just have to use a y8 camshaft. If you want I can compare the specs of a stock y8 cam and an a2 cam tomorrow
Good luck on the build though. Sounds like it's going to be pretty sweet.
Last edited by SlimRisk; 02-01-2012 at 11:41 AM.
#9
EM2ti
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: San Diego, CA
Posts: 1,102
Likes: 0
Received 3 Likes
on
3 Posts
Rep Power: 269 Re: Maxtierney's D17A2 Build Thread
Thanks ya'll. Step one. Heading up to L.A. this weekend to check out a complete D17A2 drop-in, with a tranny even. $400 seems like a pretty good deal for a 2005 (with 70K miles). A bit more than the $100 long block I initally wanted to buy, but this one has EVERYTHNIG, sensors, alternator, tranny, etc. I can piece out whatever I don't use. Hopefully, it's as advertised.
#10
03 Civic EX
Join Date: May 2012
Location: MN
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Maxtierney's D17A2 Build Thread
Any update on your build. I have the same engine and have been researching for a possible build myself. Would love to hear your progress.
#12
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,787
Received 1,443 Likes
on
1,198 Posts
Rep Power: 338 Re: Maxtierney's D17A2 Build Thread
afraid Max is kinda in a bind right now with engines.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
BootyDo
7th Generation Civic 2001 - 2005
8
06-21-2016 03:45 PM
Touge
Canada East
0
07-28-2015 09:46 PM
Touge
Ottawa
0
07-18-2015 05:38 PM
Touge
Canada East
0
07-18-2015 05:37 PM