Rep Power: 321

I was wondering before I order springs i had a question. If i get the same drop on all 4 will the back sit lower then the front? So should i get like a 1.75 in front and 1.5 in the back to make it sit even?

 
Rep Power: 320

i think it'll be fine either way. I think the front sits a little lower in the front stock anyways. If your really concerned, you might as well get some neuspeed sport springs. Its 1.75 in the front and 1.5 in the rear. I have them on my ride and i love them.

They still leave a 2 finger gap but then again its a daily driver. The little extra drop in the front does give you a little extra handling since most of the weight in our cars is in the front, but it does make your ride really bouncy on dips if your on stock shocks

 
Rep Power: 0

My rear dropped lower than the front on my car from the sec they were on, no settling, nothing. I have goldlines, 1.75" all around. more like 2"+. But after I put the turbo kit on my car, it seemed to drop the front some more, so its a little mroe even, and definately better handling. The added weight/lowered gravity up front seemed to help a lot??

If you want it to look even, get a lower drop on the front. here is a pic of mine.




there is no finger gap in the rear, and there WAS about 1.5 finger gap in the front before, now its about half-1finger gap.

 
Rep Power: 0

and both of those were before the turbo was added, so thats what it looked like w/out the added weight.

 
Rep Power: 379

if you are concerned, i would say go w/ neuspeed as well, I love mine, thought it is a little bouncy, nothing huge, just a little noticable on realy bad roads... I live in the country, so I notice it, but when im in town, smooth sailing... though I for somereason have been getting a squeeking/creaking noise from my rears, Im not shure I have my rear shocks set right... not shure...

 
Rep Power: 379

O, btw, I just replaced my rear shocks... so yea, that may have somthing to do w/ the squeek... just thought I should add that... lol

 
Rep Power: 296

i got neuspeed sports and have barely any room to squeeze a finger in

 
Rep Power: 379

Oh yea, thanks for adding that, I have no gap for fingers in back, and front maby 1.5 maby

 
Rep Power: 321

Does neuspeed make a 1.5" or a 1.75" drop? I only seen 2 and 2.25" on horsepowerfreaks.com

 
Rep Power: 296

search for Neuspeed SPORTS. Neuspeed RACE is what you found.

 
Rep Power: 321

okay i found them, so 1.75" in the front and 1.5" in the back, will that be too low? I don't want my wheels to tuck at all. I want them to be about 1 to 1.5finger. Give or take a little.

 
Rep Power: 379

Here is a few pics... some of them arent too good, but may give you an idea...

 
Rep Power: 321

What size wheels are on there? 16 or 17"? I have 18" with 215/35/18 tire will that be about a finger or 1 1/2?

 
Rep Power: 320

i have 17's on my ride and i have 1 1/2 in the front and 2 finger in the rears. I installed them last week, so my springs are still settling but thats how it looks so far.

 
Rep Power: 0

Get B&G's coilovers and adjust them to watever drop u want :-)

 
Rep Power: 365

i dont think its so much that the front sits lower as it is that the rear wheel wells hang down a bit more... for example bmw 3 series, the rear wheel always get tucked up in the wheel well (look at the racing versions) whereas the front tires are about even with the wheel well, despite an even drop.

 
Rep Power: 321

everyone and their dog has neuspeed sport springs.

 
Rep Power: 321

I'm going with the Neuspeed Springs - Sport 1.75" F / 1.5" R, 183.95 + shipping. Does anyone know of a better place to get them for less? i'm on horsepowerfreaks.com

 
Rep Power: 321

Nevermind, i found some on ebay for 124.95
http://cgi.ebay.com/ebaymotors/ws/eB...category=33586

What would be better? Tein S-tech lowering springs, 1.3 f 1.4 R or the neuspeed sports?

 
Rep Power: 0

whoever negative repped me and said, god I hate your rims. thanks for the neg. rep. You coulda just stated your opinion, but you have to be a **** and be a little bitc*.

 
Rep Power: 0

don't get tein s tech.. i have them now and the rear sags....
i think i might be getting tein basic coilover to have an even drop both front & rear..

 
Rep Power: 321

I got the Neuspeed Sport Springs, should be here this afternoon. Tomorrow the drop is going on, i just received the Tokico Blues SPC Camber kit this morning. I'm prolly going to the Tein Basic or SS Coilovers in September.

 
Rep Power: 321

Well my springs just came in and i opened the box and to my surprise the rears are red and the fronts are yellow, is this right? I thought they were all the same color? There isn't anything wrong with them is there?

 
Rep Power: 296

mine were all red