Rep Power: 0

i wanted to know if the koni yellows come with 4 adjusting damper ***** for the 01+ civic or do they only come with 2 which are placed under the hood?


my set only came with 2 so im curious

 
Rep Power: 424

you don't leave the **** on permanently. You adjust and remove it. Its like a key.

 
Rep Power: 412

They give you two so you have a spare....

 
Rep Power: 0

speaking of koni yellows... should the mounting plate be sitting so the cup is upward or pointing downward?

heres a shot i took of the koni yellow rears...

and heres one installed from the gallery from a member here...
http://www.7thgencivic.com/memberrid...&searchid=2565

 
Rep Power: 412

The spring sits on the pearch. You have it upside down.

 
Rep Power: 0

kinda weird that its sitting face down x_x

are their any other things i should be aware of before installing these with my sleeved coilovers?

 
Rep Power: 424

Which sleeves?

 
Rep Power: 0

skunk2 sleeve coilover kit


update: funny thing was...i had these skunk2s on stock struts and i didnt use any o-rings. i did some research here and it seemed like o-rings were neccesary when installing konis. so i let the shop be aware of that and told them to call me if i need them so i can run down autozone to grab some. hours went by...they installed my driver front side with no problem at all. but i had to leave my car overnight because they didnt finish the passenger side by closing time. btw, their installing the fronts and ill be doing rears this weekend


so poor civic is out their in their parking lot getting cold with the front wheels removed. would it help to take a photo of the driver side with the wheel off at the lot and see if you can point out anything wrong? i guess im just anxious