Rep Power: 314

i have both front and rear camber kits on this car. looking for good treadlife out of my tires cuz i just bought em. Not too concerned on how fast i can turn with them or what not, just as long as they last there 50k miles. is the left front camber right and what about the toe in the back? thanx

Left front camber -.86
caster 2.00
toe -.03

right front camber -.45
caster 2.50
toe -.05

left rear camber -.67
toe 0.07

right rear camber -.78
toe 0.06

 
Rep Power: 452

everything looks ok, except the left front camber is a bit out according to the specs I have from my last alignment. The specs you should have that the shop I go to uses is

Front camber -0.8 / 0.8
Caster 0.6 / 2.6
toe -0.12 / 0.12

Rear camber -1.5 / 0.0
Toe 0.04 / 0.16

I am assuming you just go an alignment? If so, it should show you the specs on the sheet they gave you and usually numbers in red are angles out of spec and numbers in green are angles within spec.

 
Rep Power: 412

Everything is in/close to spec, but generally get less camber on the drivers side. That should be fine though.

 
Rep Power: 314

should i take it back and make them fix the front left drivers side? they put... .25 to -1.25 as the specified range.

 
Rep Power: 452

I think you will be ok. Some shops use a broader range of specs then what honda uses, so as long as it is within that shops specs, you should be ok. As long as on the sheet it shows the spec in green, you are ok. (that is if the sheet is like mine).

 
Rep Power: 314

i think they used the wrong specs, cuz it says 03 civic si, i got an lx.

 
Rep Power: 0

i got a 02 ex coupe, are these specs looking alright??

caster: (L) 1.75 (R) 1.92
camber: (L) -0.75 (R) -0.75
toe: (L) 0.00 (R) 0.00

 
Rep Power: 424

They seem alright.

 
Rep Power: 327

What he said