Rep Power: 0

Hi !

I have a EM2 and I found a set of enkei RPF1 16x7 +35 offset.

The tire on the wheel are 205/50/R16

does everyone know If that will rub in the front or in the rear or in the front and rear ?

I don't want use the fender roler, so if i need to rolle my fender, I will cancel the project to buy RPF1.


thanks a lot !

 
Rep Power: 0

nobody ?

 
Rep Power: 353

It shouldn't rub. I was running a similar setup and I was slammed

 
Rep Power: 0

nice thanks a lot !! i will run slammed the nest summer, so that need to pass

 
Rep Power: 0

Sounds cool, those RPF1's are soooo nice! I've heard they rust easily though, so definitely keep them maintained!

 
Rep Power: 353

Whoever/where ever you heard that is COMPLETLY false. They are made of aluminum (hence why they are so light)... And aluminum doesn't rust.

Now, fake/replica rpf1 are a different story

 
Rep Power: 0

I wanted to be sure if that do not rub. So I decided to going to see the EM2 with the RPF1.

In the front , It's OK

In te rear, It's OK with a lot camber. If I wanted my wheel with no camber, that rub. So I decided to not buy it.

The best, It's 16x7 with offset 42. After that, you can add spacer that you want.

 
Rep Power: 353

Did you take into account you can roll rear fenders