Rep Power: 0

So I have 4 BBS RS' that are for sale I found, and I was wondering how everyone feels about the fitment or if it's too much for the 01-03 civic coupe?

There are two wheels, two are 16x8 +30 offset (possible front two wheels?) and the other two are 16x9 with a +41 offset (possible back wheels?).

Let me know what you guys think!

 
Rep Power: 213

they will work but it depends on how low you are, how much camber you want to run, and if you want to roll your fenders and/or pull them. I say pick them up see if they fit or how much work it will take to make them fit and go from there.

 
Rep Power: 0

Alright cool, yeah im planning on having a pair of those on my 7th gen, im in love with the wheels.. So basically anything i need to do as far as camber, lowness, and fenders go i would do i guess. Do you really think i might need to pull my fenders?

 
Rep Power: 284

This site will help you a bit..

http://www.willtheyfit.com/

 
Rep Power: 0

Thank you!

 
Rep Power: 213

i doubt you will have to pull the fenders... i was just going to the extreme lol.. I'm on 17x7.5 with +20 offset all the way around and I only had to roll my rears

 
Rep Power: 0

Alright cool, I was gonna say... Yeah with all the cash from today im probably gonna invest! Btw, when the lug pattern is 5x114.3, is there a conversion for that you can just hook on to the 4 lugs?

 
Rep Power: 213

Theres spacers adapters you could use to go from 4 to 5 lug...

 
Rep Power: 0

Hah, right adapters.. Sorry. It says the bolt pattern is 5 by 114.3. Any sites for adapters?

 
Rep Power: 284

The thinnest I've ever seen adapters are 15mm, so that turns the off-sets to +15mm and +26mm for around $200. The alternative would be an RSX 5 lug conversion, which has the advantage of better brakes and rear disks, but would cost $400-500.

 
Rep Power: 0

I'd probably go with the 200 dollar choice, rsx 5 lug isn't worth all the hassle... By the way Mindbomber, I got a set of rs'!! just over 700 bucks, shipped to my door. that website rules.