Rep Power: 0

I've taken my Transmission apart to replace a bad input shaft bearing in my 2005 Civic LX Special Edition (manual Transmission) Unfortunately, when I was lifting out the mainshaft and counter shaft assembly, the two washers directly next to the inputshaft bearing fell on the floor. Although the two washers look the same, they're different, on appears to be beveled and the other looks like a regular washer. I need to know what order those washers go back on the mainshaft so I can put the trans back together.

The 2 washers are shown in the video below at 6:00

 
Rep Power: 0

How accurate is this picture for a 2005 Civic LX manual? Is this the correct order and direction for the two washers?

 
Rep Power: 518

See if you can find the same thing in an online Honda parts catalog, for your car.
I can't tell if the SI reference in your pic is for USA (2.0L) or Canada (1.7L) or something else.

I think the orientation of the washers you circled are the same though.

 
Rep Power: 0

Old post but have the same issue. Does the straight washer go on top of the beveled one?