assassin9874

One of the wires to my map sensor connector broke off right at the connector and there is no way to repair it... I've tried looking in junk yards and everything but the only way to obtain a new connector with a pigtail is to buy a new engire wiring harness or stealing one lol.. and ideas on how i could obtain one? thanks guys

baron340

iTrader: (4)

Depin the connector. Find a scrap connector in the junk yard. Depin that to get the pins. Or just disassemble and reuse the old pin. Attach new pin to broken wire. Repin connector.

assassin9874

I've tried to find replacement pins but nobody carries anything close to what the old ones look like...

lazlong

If you can find a connector you can crack it open with a razor knife or a dremel tool for the pins.

http://www.car-part.com/ or http://www.picknpull.com/

Most Hondas and Acuras share the same connectors. For example I found a connector for my 2001 civic in a 1992 accord. If you live near one Pick-and-Pull is great for this as they don't mind if you cut the harness and they'll only charge you like $2. Good luck.