electrical problem
Thread Starter
Who is Mike Jones?
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Dec 2002
Posts: 504
Likes: 0
From: British Columbia, Canada
Rep Power: 289 
electrical problem
i'm haveing a problem with my blower motor
the motor works fine and there is 12v coming to the connectors to the blower motor when its unplugged. but when i plug it in, the negative cable doesnt want to work.
the negative cable runs to a sensor in the hvac box, it is in plain sight with. this sensor is denso part 077800-0682. it has two screws holding it in and has a 4 wire connector feeding it. one comes from the motor, one goes to ground, and two going/coming from the fan speed potentiometer.
if anyone has an electrical diagram, can you tell me what the voltages accross these connectors are as well as the resistance between them.
thanks
the motor works fine and there is 12v coming to the connectors to the blower motor when its unplugged. but when i plug it in, the negative cable doesnt want to work.
the negative cable runs to a sensor in the hvac box, it is in plain sight with. this sensor is denso part 077800-0682. it has two screws holding it in and has a 4 wire connector feeding it. one comes from the motor, one goes to ground, and two going/coming from the fan speed potentiometer.
if anyone has an electrical diagram, can you tell me what the voltages accross these connectors are as well as the resistance between them.
thanks
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
CarStuff
Safety/Security Items - SRS, Keys, Immobilizer, airbags, ABS
6
Dec 6, 2020 12:52 PM
juror
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
May 26, 2015 06:35 PM
steveneddy
Mechanical Problems/Vehicle Issues and Fix-it Forum
10
May 19, 2015 02:39 PM
Ronin
General Automotive Discussion
20
Nov 17, 2001 09:46 PM
